Readout electronics for low dark count pixel detectors based on geiger mode avalanche photodiodes fabricated in conventional CMOS technologies for future linear colliders

Resum

The high sensitivity and excellent timing accuracy of Geiger mode avalanche photodiodes makes them ideal sensors as pixel detectors for particle tracking in high energy physics experiments to be performed in future linear colliders. Nevertheless, it is well known that these sensors suffer from dark counts and afterpulsing noise, which induce false hits (indistinguishable from event detection) as well as an increase of the necessary area of the readout system. In this work, we present a comparison between APDs fabricated in a high voltage 0.35 µm and a high integration 0.13 µm commercially available CMOS technologies that has been performed to determine which of them best fits the particle collider requirements. In addition, a readout circuit that allows low noise operation is introduced. Experimental characterization of the proposed pixel is also presented in this work.

Tipus de document

Article


Versió acceptada

Llengua

Anglès

Publicat per

Elsevier B.V.

Documents relacionats

Versió postprint del document publicat a: http://dx.doi.org/10.1016/j.nima.2010.12.088

Nuclear Instruments & Methods in Physics Research Section A-Accelerators Spectrometers Detectors and Associated Equipment, 2010, vol. 650, p. 120-124

http://dx.doi.org/10.1016/j.nima.2010.12.088

Citació recomanada

Aquesta citació s'ha generat automàticament.

Drets

(c) Elsevier B.V., 2010

Aquest element apareix en la col·lecció o col·leccions següent(s)