Deoxyribonucleic acid-based electron selective contact for crystalline silicon solar cells

Resum

Development of carrier selective contacts for crystalline silicon solar cells has been recently of great interest towards the further expansion of silicon photovoltaics. The use of new electron and hole selective layers has opened an array of possibilities due to the low-cost processing and non-doping contacts. Here, a non-doped heterojunction silicon solar cell without the use of any intrinsic amorphous silicon is fabricated using Deoxyribonucleic acid (DNA) as the electron transport layer (ETL) and transition metal V<sub>2</sub>O<sub>5</sub> as the hole transport layer (HTL). The deposition and characterization of the DNA films on crystalline silicon have been studied, the films have shown a n -type behaviour with a work function of 3.42 eV and a contact resistance of 28 mΩ cm<sup>2</sup>. This non-doped architecture has demonstrated a power conversion efficiency of 15.5%, which supposes an increase of more than 9% with respect to the cell not containing the biomolecule, thus paving the way for a future role of nucleic acids as ETLs.

Tipus de document

Article


Versió publicada

Llengua

Anglès

Publicat per

Wiley-VCH

Documents relacionats

Reproducció del document publicat a: https://doi.org/10.1002/admt.202200936

Advanced Materials Technologies, 2023, vol. 8, num. 3, p. 2200936

https://doi.org/10.1002/admt.202200936

Citació recomanada

Aquesta citació s'ha generat automàticament.

Drets

cc-by (c) Tom, Thomas et al, 2022

http://creativecommons.org/licenses/by/3.0/es/

Aquest element apareix en la col·lecció o col·leccions següent(s)