Thermal noise and optomechanical features in the emission of a membrane-coupled compound cavity laser diode

Fecha de publicación

2020-02-13T15:36:37Z

2020-02-13T15:36:37Z

2016-08-19

2020-02-13T15:36:37Z

Resumen

We demonstrate the use of a compound optical cavity as linear displacement detector, by measuring the thermal motion of a silicon nitride suspended membrane acting as the external mirror of a nearinfrared Littrow laser diode. Fluctuations in the laser optical power induced by the membrane vibrations are collected by a photodiode integrated within the laser, and then measured with a spectrum analyzer. The dynamics of the membrane driven by a piezoelectric actuator is investigated as a function of air pressure and actuator displacement in a homodyne configuration. The high Q-factor (~3.4·104 at 8.3·10−3mbar) of the fundamental mechanical mode at ~73kHz guarantees a detection sensitivity high enough for direct measurement of thermal motion at room temperature (~87pm RMS). The compound cavity system here introduced can be employed as a table-top, cost-effective linear displacement detector for cavity optomechanics. Furthermore, thanks to the strong optical nonlinearities of the laser compound cavity, these systems open new perspectives in the study of non-Markovian quantum properties at the mesoscale.

Tipo de documento

Artículo


Versión publicada

Lengua

Inglés

Materias y palabras clave

Materials làser; Òptica; Laser materials; Optics

Publicado por

Nature Publishing Group

Documentos relacionados

Reproducció del document publicat a: https://doi.org/10.1038/srep31489

Scientific Reports, 2016, vol. 6, p. 31489

https://doi.org/10.1038/srep31489

info:eu-repo/grantAgreement/EC/FP7/321122/EU//SOULMAN

Citación recomendada

Esta citación se ha generado automáticamente.

Derechos

cc-by (c) Baldacci, Lorenzo et al., 2016

http://creativecommons.org/licenses/by/3.0/es

Este ítem aparece en la(s) siguiente(s) colección(ones)