Influence of porosity on the critical currents of trifluoroacetate-MOD YBa2Cu3O7 films

Resumen

The influence of porosity on the superconducting properties have been investigated on YBa/sub 2/Cu/sub 3/O/sub 7/ thin films deposited on LaAlO/sub 3/ [100] substrates by the so-called Trifluoroacetate (TFA) route. Micro-Raman spectroscopy have been used to determine the concentration of c-axis grains /spl delta/ in different samples and their influence on the final film porosity as observed from SEM imaging. This has been compared with measurements of resistivity and critical currents in the same samples. We prove that this /spl delta/ fraction is the main parameter controlling the porosity and hence the normal-state resistivity of the thin films. The optimization of the microstructure of these YBa/sub 2/Cu/sub 3/O/sub 7/ TFA films allow to have high critical currents : J/sub c/ = 3 /spl times/ 10/sup 6/ A/cm/sup 2/ at 77 K.

Tipo de documento

Artículo


Versión publicada

Lengua

Inglés

Publicado por

Institute of Electrical and Electronics Engineers (IEEE)

Documentos relacionados

Reproducció del document publicat a: https://doi.org/10.1109/TASC.2003.811832

IEEE Transactions on Applied Superconductivity, 2003, vol. 13, num. 2, p. 2504-2507

https://doi.org/10.1109/TASC.2003.811832

Citación recomendada

Esta citación se ha generado automáticamente.

Derechos

(c) Institute of Electrical and Electronics Engineers (IEEE), 2003

Este ítem aparece en la(s) siguiente(s) colección(ones)