2016-11-03T15:44:04Z
2016-11-03T15:44:04Z
2015-06-15
2016-11-03T15:44:09Z
In the present theoretical work we have considered impurities, either boron or phosphorous, located at different substitutional sites in silicon quantum dots (Si-QDs) with diameters around 1.5 nm, embedded in a SiO2 matrix. Formation energy calculations reveal that the most energetically-favored doping sites are inside the QD and at the Si/SiO2 interface for P and B impurities, respectively. Furthermore, electron and hole transport calculations show in all the cases a strong reduction of the minimum voltage threshold, and a corresponding increase of the total current in the low-voltage regime. At higher voltage, our findings indicate a significant increase of transport only for P-doped Si-QDs, while the electrical response of B-doped ones does not stray from the undoped case. These findings are of support for the employment of doped Si-QDs in a wide range of applications, such as Si-based photonics or photovoltaic solar cells.
Artículo
Versión aceptada
Inglés
Transport d'electrons; Semiconductors; Electrònica quàntica; Nanoelectrònica; Electron transport; Semiconductors; Quantum electronics; Nanoelectronics
Royal Society of Chemistry
Versió postprint del document publicat a: https://doi.org/10.1039/C5NR02616D
Nanoscale, 2015, vol. 7, num. 29, p. 12564-12571
https://doi.org/10.1039/C5NR02616D
info:eu-repo/grantAgreement/EC/FP7/320796/EU//MODPHYSFRICT
(c) Garcia-Castello, Nuria et al., 2015