Low-carbon cementitious material from municipal solid waste incineration bottom ash for street furniture and outdoor paving: A circular economy perspective

Otros/as autores/as

Universitat Politècnica de Catalunya. Doctorat en Tecnologia de l'Arquitectura, de l'Edificació i de l'Urbanisme

Universitat Politècnica de Catalunya. Departament de Tecnologia de l'Arquitectura

Universitat Politècnica de Catalunya. GICITED - Grup Interdiciplinari de Ciència i Tecnologia en l'Edificació

Fecha de publicación

2026-02-16



Resumen

This study investigates the feasibility of employing municipal solid waste incineration bottom ash (WBA) as the sole precursor for producing alkali-activated binders (AA-WBA), with the aim of developing low-carbon mortars and concretes for non-structural urban applications within a circular-economy framework. The precursor, originally in the 8-30 mm particle-size fraction reported in previous studies, was milled to obtain material below 125 µm. A series of activation conditions was examined by varying the NaOH concentration, the NaOH-to-sodium-silicate ratio, and the liquid-to-solid ratio, together with three precursor particle-size ranges (=63 µm, 90-100 µm, and 100-125 µm). The optimal formulation (1:4/0.6/4 M; 90-100 µm) achieved satisfactory mechanical performance in paste form and developed a dense microstructure characterised by the formation of C-(A)-S-H/N-A-S-H gels, as evidenced by TGA, FT-IR, and SEM analyses. As a proof of concept, this binder was used to manufacture a full-scale concrete pedestrian paving element, which exhibited adequate mechanical performance for outdoor pedestrian use at 28 days. Leaching and ecotoxicity tests indicated low metal release and no significant toxic effects, thereby demonstrating the environmental safety of the material and its potential contribution to more sustainable construction systems.


Peer Reviewed


9 - Indústria, Innovació i Infraestructura


9.4 - Per a 2030, modernitzar les infraestructures i reconvertir les indústries perquè siguin sostenibles, usant els recursos amb més eficàcia i promovent l’adopció de tecnologies i processos industrials nets i racionals ambientalment, i aconseguint que tots els països adoptin mesures d’acord amb les capacitats respectives


11 - Ciutats i Comunitats Sostenibles


11.6 - Per a 2030, reduir l’impacte ambiental negatiu per capita de les ciutats, amb especial atenció a la qualitat de l’aire, així com a la gestió dels residus municipals i d’altre tipus


12 - Producció i Consum Responsables


12.5 - Per a 2030, disminuir de manera substancial la generació de residus mitjançant polítiques de prevenció, reducció, reciclatge i reutilització


Postprint (published version)

Tipo de documento

Article

Lengua

Inglés

Documentos relacionados

https://buildingmaterialsstructures.com/volume-69/

2021 SGR 00708

Citación recomendada

Esta citación se ha generado automáticamente.

Derechos

Open Access

Este ítem aparece en la(s) siguiente(s) colección(ones)

E-prints [72263]