Enginyeria Electrònica i Biomèdica: Enviaments recents
Ara mostrant els elements 281-300 de 781
A dataset of color QR codes generated using back-compatible and random colorization algorithms exposed to different illumination-capture channel conditions
Color QR Codes are often generated to encode digital information, but one also could use colors or to allocate colors in a QR Code to act as a color calibration chart. In this dataset, we present several thousand QR Codes ...
Automated Scanning Dielectric Microscopy Toolbox for Operando Nanoscale Electrical Characterization of Electrolyte‐Gated Organic Transistors
Electrolyte-gated organic transistors (EGOTs) leveraging organic semiconductors' electronic and ionic transport characteristics are the key enablers for many biosensing and bioelectronic applications that can selectively ...
Distinct magnetism in ultrathin epitaxial NiFe2O4 films on MgAl2O4 and SrTiO3single crystalline substrates
Spinel ferrites are being considered for advanced spintronic applications. Here, we report on the magnetic properties of ultrathin (3-37 nm) epitaxial films of NiFe2O4 (NFO) on MgAl2O4 (MAO) and SrTiO3 (STO) single crystalline ...
Back-compatible Color QR Codes for colorimetric applications
Color correction techniques in digital photography often rely on the use of color correction charts, which require including this relatively large object in the field of view. We propose here to use QR Codes to pack these ...
Nanoscale measurement of the dielectric constant of supported lipid bilayers in aqueous solutions with electrostatic force microscopy
We present what is, to our knowledge, the first experimental demonstration of dielectric constant measurement and quantification of supported lipid bilayers in electrolyte solutions with nanoscale spatial resolution. The ...
Color QR Codes for Smartphone-Based Analysis of Free Chlorine in Drinking Water
Free chlorine (FC) plays a crucial role in ensuring the safety of drinking water by effectively inactivating pathogenic microorganisms. However, traditional methods for measuring FC levels often require specialized equipment ...
A reusable smart interface for gas sensor resistance measurement
The advances of the semiconductor industry enable microelectromechanical systems sensors, signal conditioning logic and network access to be integrated into a smart sensor node. In this framework, a mixed-mode interface ...
Online decorrelation of humidity and temperature in chemical sensors for continuous monitoring
A method for online decorrelation of chemical sensor signals from the effects of environmental humidity and temperature variations is proposed. The goal is to improve the accuracy of electronic nose measurements for ...
Vibrational and crystalline properties of polymorphic CuInC2 (C=Se,S) chalcogenides
This paper deals with the analysis of the vibrational and crystallographic properties of CuInC2 sC=S,Sed chalcogenides. Experimentally, evidence on the coexistence in epitaxial layers of domains with different crystalline ...
Majority carrier capture cross section determination in the large deep trap concentration cases
A method to determine the thermal cross section of a deep level from capacitance measurements is reported. The results enable us to explain the nonexponential behavior of the capacitance versus capture time when the trap ...
Cells as active particles in asymmetric potentials: Motility under external gradients
Cell migration is a crucial event during development and in disease. Mechanical constraints and chemical gradients can contribute to the establishment of cell direction, but their respective roles remain poorly understood. ...
Sliding window multi-curve resolution: application to gas chromatography - ion mobility spectrometry
Blind source separation (BSS) techniques aim to extract a set of source signals from a measured mixture in an unsupervised manner. In the chemical instrumentation domain source signals typically refer to time-varying analyte ...
Nanocrystalline SnO2 by liquid pyrolisis
Liquid pyrolysis is presented as a new production method of SnO2 nanocrystalline powders suitable for gas sensor devices. The method is based on a pyrolytic reaction of high tensioned stressed drops of an organic solution ...
Locally grown SnO2 NWs as low power ammonia sensor
Localized growth of SnO2 nanowires on top of CMOS compatible micromembranes that incorporate a buried heater and prepatterned interdigitated electrodes has been achieved that presents the advantage that it allows to easily ...
1.84 micron emission of Tm3+ sensitized by Yb3+ ions in monoclinic KGd(WO4)2 single crystals
By exciting at 940 nm, we have characterized the 1.84 m near infrared emission of trivalent thulium ions in Yb3+, Tm3+:KGd WO4 2 single crystals as a function of the dopant concentration and temperature, from 10 K to room ...
Microinductive signal conditioning with resonant differential filters: high-sensitivity biodetection applications
Inductive-based devices integrated with Si technology for biodetection applications are characterized, using simple resonant differential filter configurations. This has allowed the corroboration of the viability of the ...
Determination of the direct band-gap energy of InAlAs matched to InP by photoluminescence excitation spectroscopy
A series of InxAl12xAs samples (0.51,x,0.55) coherently grown on InP was studied in order to measure the band-gap energy of the lattice matched composition. As the substrate is opaque to the relevant photon energies, a ...
A low-cost approach to low-power gas sensors based on self-heating effects in large arrays of nanostructures
The usual operation of a conductometric sensor device requires of an external energy source (i.e. an embedded heater). In the last years, the Joule effect in the sensing material, the so called self-heating effect, offered ...
Low dark count geiger mode avalanche photodiodes fabricated in conventional CMOS technologies
Avalanche photodiodes operated in the Geiger mode present very high intrinsic gain and fast time response, which make the sensor an ideal option for those applications in which detectors with high sensitivity and velocity ...
Continuous spatial representations in the olfactory bulb may reflect perceptual categories
In sensory processing of odors, the olfactory bulb is an important relay station, where odor representations are noise-filtered, sharpened, and possibly re-organized. An organization by perceptual qualities has been found ...
