This paper describes the results of a comprehe nsive and ongoing project to control unsteady fluid - dynamic behaviour and associated effects at Svorka hydro power plant (25 MW, 260 m, 600 rpm), operated by Statkraft in Norway. This Francis unit had an original air admission system installed on the draft tube wall and turbine shaft. However, these systems did not perform satisfactorily to prevent high intensity pressure fluctuations due to vortex rope at part load. To mitigate them, a complementary draft tube water injection system, designed by Flow Desig n Bureau AS (FDB), was installed in 2010 . Moreover, the runner suffered from cavitation pitting on the blades and a measuring campaign with several accelerometers and an acoustic emission sensor concluded that the unit was susceptible to high load cavitation erosion. Given the complexity of the turbine flow, it was decided t o install four transparent acrylic gla s s windows on the draft tube, allowing for visual access to the runner blades and outlet flow. To evaluate the influence of the draft tube i njection system on the cavitation behaviour, a series of measurements of cavitation intensity were carried out. High frequency data from the sensors were processed with demodulation techniques at various expected modulation frequencies, particularly the bl ade passing frequency and the frequency of the draft tube vortex rope. Furthermore, the pressure pulsations were measured and quantified with pressure sensors on the draft tube wall. The results indicate that draft tube water injection has little or no eff ect on the measured cavitation intensity in the runner. However, other aspects of the machine , including the seasonal and daily variation of the submergence level , must be taken into consideration. In conclusion, it appears that additional long - term observ ations are needed to clarify the global dynamic behaviour along the entire operating range

Peer Reviewed