Influence of the regime of electropulsing-assisted machining on the plastic deformation of the layer being cut

Home | About RECERCAT | Contact

Català | Castellano

All of RECERCAT

By Communities &
Collections By Defense Date By Authors By Titles By Subject

This Collection

By Defense Date By Authors By Titles By Subject

Statistics

View Statistics All RECERCAT

My RECERCAT

Other repositories directory

RECERCAT Home > Universitat Politècnica de Catalunya > Documents de recerca > View document

To access the full text documents, please follow this link: http://hdl.handle.net/2117/117696

dc.contributor	Universitat Politècnica de Catalunya. Departament d'Enginyeria Mecànica
dc.contributor	Universitat Politècnica de Catalunya. Departament d'Enginyeria Elèctrica
dc.contributor	Universitat Politècnica de Catalunya. GAECE - Grup d'Accionaments Elèctrics amb Commutació Electrònica
dc.contributor	Universitat Politècnica de Catalunya. TECNOFAB - Grup de Recerca en Tecnologies de Fabricació
dc.contributor.author	Hameed, Saqib
dc.contributor.author	González Rojas, Hernan Alberto
dc.contributor.author	Perat Benavides, Josep Ignasi
dc.contributor.author	Nápoles Alberro, Amelia
dc.contributor.author	Sánchez Egea, Antonio J
dc.date	2018-05-25
dc.identifier.citation	Hameed, S., Gonzalez-Rojas, Hernan A., Perat, J., Napoles, A., Sánchez, A. Influence of the regime of electropulsing-assisted machining on the plastic deformation of the layer being cut. "Materials", 25 Maig 2018, vol. 11, núm. 6, p. 886-1 - 886-10.
dc.identifier.citation	1996-1944
dc.identifier.citation	https://www.terkko.helsinki.fi/article/18779231_materials-vol-11-pages-886-influence-of-the-regime-of-electropulsing-assisted-machining-on-the-plastic-deformation-of-the-layer-being-cut
dc.identifier.citation	10.3390/ma11060886
dc.identifier.uri	http://hdl.handle.net/2117/117696
dc.language.iso	eng
dc.relation	http://www.mdpi.com/1996-1944/11/6/886
dc.rights	Attribution 4.0 International
dc.rights	https://creativecommons.org/licenses/by/4.0/
dc.rights	info:eu-repo/semantics/openAccess
dc.subject	Àrees temàtiques de la UPC::Enginyeria mecànica::Processos de fabricació mecànica
dc.subject	Àrees temàtiques de la UPC::Enginyeria elèctrica
dc.subject	Turning
dc.subject	Electropulsing
dc.subject	Machinability
dc.subject	Chip compression ratio
dc.subject	Current density
dc.subject	Specific cutting energy
dc.subject	Torns mecànics
dc.title	Influence of the regime of electropulsing-assisted machining on the plastic deformation of the layer being cut
dc.type	info:eu-repo/semantics/publishedVersion
dc.type	info:eu-repo/semantics/article
dc.description.abstract	In this article, the influence of electropulsing on the machinability of steel S235 and aluminium 6060 has been studied during conventional and electropulsing-assisted turning processes. The machinability indices such as chip compression ratio ¿, shear plane angle f and specific cutting energy (SCE) are investigated by using different cutting parameters such as cutting speed, cutting feed and depth of cut during electrically-assisted turning process. The results and analysis of this work indicated that the electrically-assisted turning process improves the machinability of steel S235, whereas the machinability of aluminium 6060 gets worse. Finally, due to electropluses (EPs), the chip compression ratio ¿ increases with the increase in cutting speed during turning of aluminium 6060 and the SCE decreases during turning of steel S235.
dc.description.abstract	Peer Reviewed

Show simple item record

All of RECERCAT

This Collection

Statistics

My RECERCAT

Related documents

Other documents of the same author