Título:
|
Influence of the longitudinal reinforcement on the shear strength of one-way concrete slabs
|
Autor/a:
|
Gurutzeaga Zubillaga, Mikel; Oller Ibars, Eva; Ribas González, Carlos Rodrigo; Cladera Bohigas, Antoni; Marí Bernat, Antonio Ricardo
|
Otros autores:
|
Universitat Politècnica de Catalunya. Departament d'Enginyeria Civil i Ambiental; Universitat Politècnica de Catalunya. ATEM - Anàlisi i Tecnologia d'Estructures i Materials |
Abstract:
|
The final publication is available at Springer via http://dx.doi.org/10.1617/s11527-014-0340-5 |
Abstract:
|
The shear strength of one-way slabs is studied in this paper via an experimental program performed by the authors and the analysis of a shear test database. The experimental program, in which six slabs and three beams divided into two series were tested, was developed to study the influence of the slab width, the longitudinal reinforcement spacing and the bottom transverse reinforcement on the shear response of one-way slabs. The results showed that the width and the bottom transverse reinforcement do not significantly affect the shear response of the slab. The shear failure surface depends on the longitudinal reinforcement spacing because a three-dimensional
resisting mechanism formed as a result of large bar spacing. A database of 79 tests on slabs was analysed to study in depth the influence of these parameters on the shear strength of one-way slabs. Finally, different shear procedures were applied to the database to
evaluate their reliability to predict the shear strength. |
Abstract:
|
Peer Reviewed |
Materia(s):
|
-Àrees temàtiques de la UPC::Enginyeria civil::Materials i estructures::Materials i estructures de formigó -Concrete slabs--Testing -Reinforced concrete -Slab -Shear test -Shear strength -Longitudinal reinforcement spacing -Lloses de formigó -- Proves |
Derechos:
|
|
Tipo de documento:
|
Artículo - Versión presentada Artículo |
Compartir:
|
|