Para acceder a los documentos con el texto completo, por favor, siga el siguiente enlace: http://hdl.handle.net/2117/12628

Cone penetration tests in a virtual calibration chamber
Arroyo Alvarez de Toledo, Marcos; Butlanska, Joanna; Gens Solé, Antonio; Calvetti, Francesco; Jamiolkowski, Michael
Universitat Politècnica de Catalunya. Departament d'Enginyeria del Terreny, Cartogràfica i Geofísica; Universitat Politècnica de Catalunya. MSR - Mecànica del Sòls i de les Roques
A virtual calibration chamber was built using a threedimensional model based on the discrete-element method. The chamber was then filled with a scaled granular equivalent of Ticino sand, the material properties of which were selected by curve-fitting triaxial tests. Cone penetration tests were then performed under different initial densities and isotropic stresses. Penetration resistance in the virtual calibration chamber was affected by the same cone/chamber size effect that affects physical calibration chambers and was corrected accordingly. The corrected cone resistance obtained from the virtual calibration chamber cone penetration tests shows good quantitative agreement with correlations that summarise previous physical results.
Peer Reviewed
Virtual calibration chamber
Calibration -- Research
Tessin sands
Calibratge -- Aparells i instruments
Sorra
info:eu-repo/semantics/publishedVersion
Artículo
         

Mostrar el registro completo del ítem

Documentos relacionados

Otros documentos del mismo autor/a

Ciantia, Matteo Oryem; Arroyo Alvarez de Toledo, Marcos; Gens Solé, Antonio; Calvetti, Francesco
Ciantia, Matteo Oryem; Arroyo Alvarez de Toledo, Marcos; Gens Solé, Antonio; Calvetti, Francesco
Ciantia, Matteo Oryem; Arroyo Alvarez de Toledo, Marcos; Gens Solé, Antonio; Calvetti, Francesco
Ciantia, Matteo Oryem; Arroyo Alvarez de Toledo, Marcos; Butlanska, Joanna; Gens Solé, Antonio
Butlanska, Joanna; O'Sullivan, C.; Arroyo Alvarez de Toledo, Marcos; Gens Solé, Antonio