Para acceder a los documentos con el texto completo, por favor, siga el siguiente enlace: http://hdl.handle.net/20.500.12328/2541

Biofunctionalization strategies on tantalum-based materials for osseointegrative applications
Mas Moruno, Carlos; Garrido, Beatriz; Rodriguez, Daniel; Rupérez de Gracia, Elisa; Gil Mur, Francisco Javier
The use of tantalum as biomaterial for orthopedic applications is gaining considerable attention in the clinical practice because it presents an excellent chemical stability, body fluid resistance, biocompatibility, and it is more osteoconductive than titanium or cobalt-chromium alloys. Nonetheless, metallic biomaterials are commonly bioinert and may not provide fast and long-lasting interactions with surrounding tissues. The use of short cell adhesive peptides derived from the extracellular matrix has shown to improve cell adhesion and accelerate the implant’s biointegration in vivo. However, this strategy has been rarely applied to tantalum materials. In this work, we have studied two immobilization strategies (physical adsorption and covalent binding via silanization) to functionalize tantalum surfaces with a cell adhesive RGD peptide. Surfaces were used untreated or activated with either HNO3 or UV/ozone treatments. The process of biofunctionalization was characterized by means of physicochemical and biological methods. Physisorption of the RGD peptide on control and HNO3-treated tantalum surfaces significantly enhanced the attachment and spreading of osteoblast-like cells; however, no effect on cell adhesion was observed in ozone-treated samples. This effect was attributed to the inefficient binding of the peptide on these highly hydrophilic surfaces, as evidenced by contact angle measurements and X-ray photoelectron spectroscopy. In contrast, activation of tantalum with UV/ozone proved to be the most efficient method to support silanization and subsequent peptide attachment, displaying the highest values of cell adhesion. This study demonstrates that both physical adsorption and silanization are feasible methods to immobilize peptides onto tantalum-based materials, providing them with superior bioactivity.
-Materials biomèdics
-Ortopèdia
-Titani
-Cobalt
-Crom
-Implants artificials
-Biocompatibilitat
-Materiales biomédicos
-Ortopedia
-Titanio
-Cobalto
-Cromo
-Implantes artificiales
-Biocompatibilidad
-Biomedical materials
-Orthopedics
-Titanium
-Cobalt
-Chrome
-Artificial implants
-Biocompatibility
-61
-620
This article is distributed under the terms of the Creative Commons Attribution License which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited.
https://creativecommons.org/licenses/by-nc-nd/4.0/
Artículo
Artículo - Versión publicada
Springer Nature
         

Mostrar el registro completo del ítem

Documentos relacionados

Otros documentos del mismo autor/a

Mas Moruno, Carlos; Garrido, Beatriz; Rodríguez Rius, Daniel; Rupérez de Gracia, Elisa; Gil Mur, Francisco Javier
Mas Moruno, Carlos; Garrido Dominguez, Beatriz; Rodríguez Rius, Daniel; Rupérez de Gracia, Elisa; Gil Mur, Francisco Javier
Rupérez de Gracia, Elisa; Manero Planella, José María; Riccardi Hernandez, Kiara; Li, Yuping; Aparicio Bádenas, Conrado José; Gil Mur, Francisco Javier
González, Marta; Salvagni, Emiliano; Rodríguez Cabello, J.C.; Rupérez de Gracia, Elisa; Gil Mur, Francisco Javier; Manero Planella, José María; Peña, Javier
Alfonso, M.V.; Espinar, Eduardo; Llamas, José María; Rupérez de Gracia, Elisa; Manero Planella, José María; Barrera, J.M; Solano, E.; Gil Mur, Francisco Javier