Títol:
|
A simple approach for fast controller prototyping for a three phase interleaved DC-DC converter
|
Autor/a:
|
Gavriluta, Catalin; Citro, Costantino; Nisak, Khairul; Beltrán San Segundo, Héctor
|
Altres autors:
|
Universitat Politècnica de Catalunya. Departament d'Enginyeria Elèctrica |
Abstract:
|
Initial control prototyping in power electronics is often a matter of trial and error because of the complicated mathematics involved in modeling systems based on their
internal structure. Moreover, in practice, small changes as the introduction of a measurement filter or the change of the sensing system appear all the time. If the controller design method was based on the internal structure of the system, then these small changes would mean a re-iteration through all the cumbersome equations. This paper presents a simple methodology for fast
control prototyping based on the approximation of the Bode plots. As prerequisites, a power electronics simulation software as PSIM is needed. The method is presented by taking as a study
case the design of a current control loop of a 30kW three phase interleaved DC-DC converter. Simulations are presented for the
different considered controllers, and finally the method is validated by experimental results. |
Matèries:
|
-Àrees temàtiques de la UPC::Enginyeria electrònica::Electrònica de potència -Power electronics -Electrònica de potència |
Drets:
|
Attribution-NonCommercial-NoDerivs 3.0 Spain
http://creativecommons.org/licenses/by-nc-nd/3.0/es/ |
Tipus de document:
|
Article - Versió publicada Objecte de conferència |
Compartir:
|
|