Ultrathin a-Si:H/Oxide transparent solar cells exhibiting UV-Blue selective-like absorption

Abstract

This is the peer reviewed version of the following article: Lopez-Garcia, A. [et al.]. Ultrathin a-Si:H/Oxide transparent solar cells exhibiting UV-Blue selective-like absorption. "Solar RRL", April 2023, which has been published in final form at https://onlinelibrary.wiley.com/doi/10.1002/solr.202200928. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions. This article may not be enhanced, enriched or otherwise transformed into a derivative work, without express permission from Wiley or by statutory rights under applicable legislation. Copyright notices must not be removed, obscured or modified. The article must be linked to Wiley’s version of record on Wiley Online Library and any embedding, framing or otherwise making available the article or pages thereof by third parties from platforms, services and websites other than Wiley Online Library must be prohibited.

Herein, the fabrication of transparent solar cells based on nanometric (8 and30 nm) intrinsic hydrogenated amorphous siliconfilms (a-Si:H) and using oxidethinfilms as transparent carrier selective contacts are reported. The ultrathindevices present photovoltaic effect and high average visible transmittance (AVT).Additionally, they display a shifted spectral response toward short wavelengths.Glass/fluorine-doped tin oxide (FTO)/aluminum-doped zinc oxide (AZO)/a-Si:H/MoO3/indium tin oxide (ITO) prototypes are shown, presenting AVT=35% andphotovoltaic conversion efficiency (PCE)=2% for a device with a 30 nm a-Si:Hfilm. This yields a light utilization efficiency (LUE) of 0.7%, a record up to this datefor inorganic oxide-based transparent solar cells. For devices including an 8 nma-Si:Hfilm, the AVT reaches 66% with a PCE=0.6% (LUE=0.4%). These highAVT values are comparable or even superior in some cases to those achieved forpure oxide devices. Thesefindings confirm the potential of the proposedarchitectures for the development of highly transparent energy harvesters asfunctional components in building-integrated photovoltaics (BIPV), agrophoto-voltaics (APV), sensors and other low-power devices. In addition, these devicesare fabricated with earth-abundant materials and with up-scalable techniquesthat can allow for a feasible implementation.

Peer Reviewed

Postprint (published version)