Enginyeria Electrònica i Biomèdica: Envíos recientes
Mostrando ítems 41-60 de 781
CMOS MAPS upgrade for the Belle II Vertex Detector
The success of the Belle II experiment in Japan relies on the very high instantaneous luminosity, close to 6x10^35 cm^-2 s^-1, expected from the SuperKEKB collider. The corresponding beam conditions at such luminosity ...
LoRa Power Model for Energy Optimization in IoT Applications
Energy efficiency is a key requirement for Internet of Things (IoT) nodes, particularly in applications powered by energy harvesting that operate without batteries. In this work, we present a parametric power model of a ...
Operational experience of the Belle II pixel detector
The Belle II experiment at the SuperKEKB accelerator has started its physics data taking with the full detector setup in March 2019. It aims to collect 40 times more collision data compared with its predecessor Belle ...
Visualized multiprobe electrical impedance measurements with STM tips using shear force feedback control
Here we devise a multiprobe electrical measurement system based on quartz tuning forks (QTFs) and metallic tips capable of having full 3D control over the position of the probes. The system is based on the use of bent ...
BBB-on-a-chip with integrated micro-TEER for permeability evaluation of multi-functionalized gold nanorods against Alzheimers disease
The lack of predictive models that mimic the blood–brain barrier (BBB) hinders the development of effective drugs for neurodegenerative diseases. Animal models behave differently from humans, are expensive and have ethical ...
Subpixel real-time jitter detection algorithm and implementation for polarimetric and helioseismic imager
The polarimetric and helioseismic imager instrument for the Solar Orbiter mission from the European Space Agency requires a high stability while capturing images, specially for the polarimetric ones. For this reason, an ...
Structural factors impacting carrier transport and electroluminescence from Si nanocluster-sensitized Er ions.
We present an analysis of factors influencing carrier transport and electroluminescence (EL) at 1.5 µm from erbium-doped silicon-rich silica (SiOx) layers. The effects of both the active layer thickness and the Si excess ...
Performance of prototype tandem UV filter and organic transparent photovoltaic windows
Building integrated photovoltaics (PV) are promising technologies to integrate renewable energy production and achieve positive energy buildings. Transparent photovoltaics increase the integration options, especially in ...
Observation of the Decay Ξb-→p K-K-
Decays of the Ξb- and Ωb- baryons to the charmless final states p h-h'- , where h(') denotes a kaon or pion, are searched for with the LHCb detector. The analysis is based on a sample of proton-proton collision data collected ...
Electrical pump & probe and injected carrier losses quantification in Er doped Si slot waveguides
Electrically driven Er3+ doped Si slot waveguides emitting at 1530 nm are demonstrated. Two different Er3+ doped active layers were fabricated in the slot region: a pure SiO2 and a Si-rich oxide. Pulsed polarization driving ...
Resonant Raman scattering based approaches for the quantitative assessment of nanometric ZnMgO layers in high efficiency chalcogenide solar cells
This work reports a detailed resonant Raman scattering analysis of ZnMgO solid solution nanometric layers that are being developed for high efficiency chalcogenide solar cells. This includes layers with thicknesses below ...
Measurements of the branching fractions and CP asymmetries of B±→J/ψπ± and B±→ψ(2S)π± decays
A study of B ± → J / ψ π ± and B ± → ψ ( 2 S ) π ± decays is performed with data corresponding to 0.37 fb − 1 of proton-proton collisions at √ s = 7 TeV . Their branching fractions are found to be B ( B ± → J / ψ ...
Shot noise anomalies in elastic nondegenerate diffusive conductors
We present a theoretical investigation of shot-noise properties in nondegenerate elastic diffusive conductors. Both Monte Carlo simulations and analytical approaches are used. Two interesting phenomena are found: (i) the ...
Precise ionospheric electron content monitoring from single-frequency GPS receivers
The number of existing global positioning system (GPS) single-frequency receivers continues growing. More than 90% of GPS receivers are implemented as low-cost single-frequency chipsets embedded in smartphones. This provides ...
Machine learning data augmentation strategy for electron energy loss spectroscopy: generative adversarial networks
Recent advances in machine learning (ML) have highlighted a novel challenge concerning the quality and quantity of data required to effectively train algorithms in supervised ML procedures. This article introduces a data ...
Nanoscale wetting of single viruses
The epidemic spread of many viral infections is mediated by the environmental conditions and influenced by the ambient humidity. Single virus particles have been mainly visualized by atomic force microscopy (AFM) in liquid ...
Reconstruction of the SiO2 structure damaged by low-energy Ar-implanted ions
The damage created in SiO2 layers by low-energy Ar ions (130 keV) and the reconstruction of the structure after various annealing steps have been characterized as a function of the implantation dose. Quantitative determinations ...
Revealing Local Grain Boundary Chemistry and Correlating it with Local Mass Transport in Mixed-Conducting Perovskite Electrodes
Grain boundary (GB) mass transport, and chemistry exert a pronounced influence on both the performance and stability of electrodes for solid oxide electrochemical cells. Lanthanum strontium cobalt ferrite (LSCF6428) is ...
Highly Selective SAM-Nanowire Hybrid NO2 Sensor: Insight into Charge Transfer Dynamics and Alignment of Frontier Molecular Orbitals
Selectivity and low power consumption are major challenges in the development of sophisticated gas sensor devices. A sensor system is presented that unifies selective sensor-gas interactions and energy-harvesting properties, ...
DronE-Nose: drone-embedded measurement platform for odour monitoring
Electronic noses have improved in terms of reliability in the last two decades. Their design has allowed for model training and validation for predicting odour emissions and classifying odour sources. In the last few years, ...
