Título:
|
Automotive radar and radome calibration to improve the direction of arrival detection performance
|
Autor/a:
|
Buitrago Ventura, Santiago; Blanch Boris, Sebastián; Romeu Robert, Jordi
|
Otros autores:
|
Universitat Politècnica de Catalunya. Departament de Teoria del Senyal i Comunicacions; Universitat Politècnica de Catalunya. ANTENNALAB - Grup d'Antenes i Sistemes Radio |
Abstract:
|
©2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. |
Abstract:
|
An assessment of the improvement in the Direction of Arrival (DoA) measurements in automotive radar sensor by joint calibration of the radar sensor plus the radome is presented. Nowadays, radar sensors are calibrated before the radome-emblem assembly. This makes radar sensors more vulnerable to the errors induced by the radome-emblems. This new approach is based on the idea of calibrating the radar sensor with the radome to improve the determination of the Direction of Arrival (DoA) and consequently reduce the angle error. |
Abstract:
|
Peer Reviewed |
Materia(s):
|
-Àrees temàtiques de la UPC::Enginyeria de la telecomunicació::Radiocomunicació i exploració electromagnètica::Radar -Radar -Calibration -Angle error -Calibration -Direction of arrival -DoA -Radar sensor -Radome
Calibration -Direction of arrival -Errors -Radar -Radomes -Angle errors -Automotive radar -Automotive radar sensors -Detection performance -Joint calibration -New approaches -Radar sensors -Radar measurement -Radar -Calibratge |
Derechos:
|
|
Tipo de documento:
|
Artículo - Versión publicada Objeto de conferencia |
Editor:
|
Institute of Electrical and Electronics Engineers (IEEE)
|
Compartir:
|
|