Study of the generation of microburrs in the process of drilling and its subsequent elimination by deburring, of tubes cylindrical aluminium AA6065-T9

Home | About RECERCAT | Contact

Català | Castellano

All of RECERCAT

By Communities &
Collections By Defense Date By Authors By Titles By Subject

This Collection

By Defense Date By Authors By Titles By Subject

Statistics

View Statistics All RECERCAT

My RECERCAT

Other repositories directory

RECERCAT Home > Universitat Politècnica de Catalunya > Documents de recerca > View document

To access the full text documents, please follow this link: http://hdl.handle.net/2117/6402

dc.contributor	Universitat Politècnica de Catalunya. Departament d'Enginyeria Mecànica
dc.contributor	Universitat Politècnica de Catalunya. TECNOFAB - Grup de Recerca en Tecnologies de Fabricació
dc.contributor.author	Salueña Berna, Javier
dc.contributor.author	Ortiz Marzo, José Antonio
dc.contributor.author	Río Cano, Carlos
dc.contributor.author	Papasseit Borrell, Roger
dc.date	2010-01
dc.identifier.citation	Salueña, X. [et al.]. Study of the generation of microburrs in the process of drilling and its subsequent elimination by deburring, of tubes cylindrical aluminium AA6065-T9. "AIP Conference proceedings", Gener 2010, vol. 1181, p. 521-530.
dc.identifier.citation	0094-243X
dc.identifier.uri	http://hdl.handle.net/2117/6402
dc.language.iso	eng
dc.relation	http://scitation.aip.org/dbt/dbt.jsp?KEY=APCPCS&Volume=1181&Issue=1
dc.rights	info:eu-repo/semantics/openAccess
dc.subject	Àrees temàtiques de la UPC::Enginyeria mecànica::Processos de fabricació mecànica::Màquines i mecanismes
dc.subject	Tools
dc.subject	Metals--Creep
dc.subject	Eines
dc.subject	Mecanització
dc.subject	Poliment i acabat
dc.title	Study of the generation of microburrs in the process of drilling and its subsequent elimination by deburring, of tubes cylindrical aluminium AA6065-T9
dc.type	info:eu-repo/semantics/submittedVersion
dc.type	info:eu-repo/semantics/article
dc.description.abstract	Enllaç a la versió editorial: http://scitation.aip.org/dbt/dbt.jsp?KEY=APCPCS&Volume=1181&Issue=1
dc.description.abstract	Creation of microburrs drilling constitute a potencial danger because their detachment can modificate the correct operation of a mechanism. The burrs must be eliminated completely in the case of pistons brake, ensuring a high productivity and a low cost. In this work has been studied the mechanism for the creation of microburrs in thru holes drilled (phi2, 02 mm) of a aluminium alloy piston AA6065-T9 in order to various parameters such as the type of drill bit, feedrate, cutting speed and lubrication, imposing a minimum feedrate of 450 mm/min not to reduce the current production. Creation of microburrs drilling is inevitable and several deburring processes have been analyzed for their total elimination. After a few first essays, It has been determined that in order that the deburring are effective must be worked with minimal and known position burrr drillings.
dc.description.abstract	Peer Reviewed

Show simple item record

All of RECERCAT

This Collection

Statistics

My RECERCAT

Related documents

Other documents of the same author