The Ultrasound Window Into Vascular Ageing: A Technology Review by the VascAgeNet COST Action

Altres autors/es

Institut Català de la Salut

[Bianchini E] Institute of Clinical Physiology, CNR, Pisa, Italy. [Guala A] Vall d’Hebron Institut de Recerca (VHIR), Barcelona, Spain. CIBERCV, Instituto de Salud Carlos III, Madrid, Spain. [Golemati S] Medical School, National and Kapodistrian University of Athens, Athens, Greece. [Alastruey J] Department of Biomedical Engineering, King’s College London, London, UK. [Climie RE] Menzies Institute for Medical Research, University of Tasmania, Hobart, Tasmania, Australia. INSERM, U970, Paris Cardiovascular Research Center (PARCC), Université de Paris, Hopital Europeen Georges Pompidou – APHP, Paris, France. [Dalakleidi K] Biomedical Simulations and Imaging (BIOSIM) Laboratory, School of Electrical and Computer Engineering, National Technical University of Athens, Athens, Greece

Vall d'Hebron Barcelona Hospital Campus

Data de publicació

2023-10-03T12:07:51Z

2023-10-03T12:07:51Z

2023-10



Resum

Arteriosclerosis; Ultrasound; Vascular ageing


Arteriosclerosi; Ecografia; Envelliment vascular


Arteriosclerosis; Ecografía; Envejecimiento vascular


Non-invasive ultrasound (US) imaging enables the assessment of the properties of superficial blood vessels. Various modes can be used for vascular characteristics analysis, ranging from radiofrequency (RF) data, Doppler- and standard B/M-mode imaging, to more recent ultra-high frequency and ultrafast techniques. The aim of the present work was to provide an overview of the current state-of-the-art non-invasive US technologies and corresponding vascular ageing characteristics from a technological perspective. Following an introduction about the basic concepts of the US technique, the characteristics considered in this review are clustered into: 1) vessel wall structure; 2) dynamic elastic properties, and 3) reactive vessel properties. The overview shows that ultrasound is a versatile, non-invasive, and safe imaging technique that can be adopted for obtaining information about function, structure, and reactivity in superficial arteries. The most suitable setting for a specific application must be selected according to spatial and temporal resolution requirements. The usefulness of standardization in the validation process and performance metric adoption emerges. Computer-based techniques should always be preferred to manual measures, as long as the algorithms and learning procedures are transparent and well described, and the performance leads to better results. Identification of a minimal clinically important difference is a crucial point for drawing conclusions regarding robustness of the techniques and for the translation into practice of any biomarker.


This article is based upon work from COST Action CA18216 VascAgeNet, supported by COST (European Cooperation in Science and Technology, www.cost.eu). A.G. has received funding from “La Caixa” Foundation (LCF/BQ/PR22/11920008). R.E.C is supported by the National Health and Medical Research Council of Australia (reference: 2009005) and by a National Heart Foundation Future Leader Fellowship (reference: 105636). J.A. acknowledges support from the British Heart Foundation [PG/15/104/31913], the Wellcome EPSRC Centre for Medical Engineering at King's College London [WT 203148/Z/16/Z], and the Cardiovascular MedTech Co-operative at Guy's and St Thomas' NHS Foundation Trust [MIC-2016-019].

Tipus de document

Article


Versió publicada

Llengua

Anglès

Publicat per

Wiley

Documents relacionats

Journal of Ultrasound in Medicine;42(10)

https://doi.org/10.1002/jum.16243

Citació recomanada

Aquesta citació s'ha generat automàticament.

Drets

Attribution-NonCommercial-NoDerivatives 4.0 International

http://creativecommons.org/licenses/by-nc-nd/4.0/

Aquest element apareix en la col·lecció o col·leccions següent(s)