RECERCAT Principal
>
Universitat Internacional de Catalunya
>
Recerca
>
Articles
>
Ciències de la Salut
>
Visualizar documento
Para acceder a los documentos con el texto completo, por favor, siga el siguiente enlace: http://hdl.handle.net/20.500.12328/1051
| dc.contributor.author | Guillem Martí, Jordi |
|---|---|
| dc.contributor.author | Cinca, Núria |
| dc.contributor.author | Punset Fuste, Miquel |
| dc.contributor.author | García Cano, Irene |
| dc.contributor.author | Gil Mur, Francisco Javier |
| dc.contributor.author | Guilemany, José Maria |
| dc.contributor.author | Dosta, Sergi |
| dc.date | 2019-06-14T10:24:59Z |
| dc.date | 2022-03-24T23:45:12Z |
| dc.date | 2019-04-24 |
| dc.identifier | Guillem-Martí, Jordi; Cinca, Núria; Punset, Miquel; García Cano, Irene; Gil Mur, Francesc Xavier; Guilemany, José Maria; Dosta, Sergi. «Porous titanium-hydroxyapatite composite coating obtained on titanium by cold gas spray with high bond strength for biomedical applications». Colloids and Surfaces B: Biointerfaces, 2019, vol. 180, p. 245-253. https://doi.org/10.1016/j.colsurfb.2019.04.048 |
| dc.identifier | 0927-7765 |
| dc.identifier | https://doi.org/10.1016/j.colsurfb.2019.04.048 |
| dc.identifier.uri | http://hdl.handle.net/20.500.12328/1051 |
| dc.description | The lack of bioactivity of titanium (Ti) is one of the main drawbacks for its application in biomedical implants since it can considerable reduce its osseointegration capacities. One strategy to overcome this limitation is the coating of Ti with hydroxyapatite (HA), which presents similar chemical composition than bone. Nonetheless, most of the strategies currently used generate a non-stable coating and may produce the formation of amorphous phases when high temperatures are used. Herein, we proposed to generate a Ti-HA composite coating on Ti surface to improve the stability of the bioactive coating. The coating was produced by cold gas spraying, which uses relatively low temperatures, and compared to a Ti coating. The coating was thoroughly characterized in terms of morphology, roughness, porosity and phase composition. In addition, the coating was mechanically characterized using a tensile loading machine. Finally, biological response was evaluated after seeding SaOS-2 osteoblasts and measuring cell adhesion, proliferation and differentiation. The novel Ti-HA coating presented high porosity and high adhesion and bond strengths. No change in HA phases was observed after coating formation. Moreover, osteoblast-like cells adhered, proliferated and differentiated on Ti-HA coated surfaces suggesting that the novel coating might be a good candidate for biomedical applications. |
| dc.format | 33 |
| dc.format | application/pdf |
| dc.language | eng |
| dc.publisher | Elsevier |
| dc.relation | Colloids and Surfaces B: Biointerfaces |
| dc.relation | 180; |
| dc.rights | http://creativecommons.org/licenses/by-nc-nd/4.0/ |
| dc.rights | Attribution-NonCommercial-NoDerivatives 4.0 International |
| dc.rights | http://creativecommons.org/licenses/by-nc-nd/4.0/ |
| dc.rights | info:eu-repo/semantics/openAccess |
| dc.subject | Titani |
| dc.subject | Titanio |
| dc.subject | Titanium |
| dc.subject | Materials biomèdics |
| dc.subject | Biomedical materials |
| dc.subject | Materiales biomédicos |
| dc.subject | Hydroxyapatite coating |
| dc.subject | 54 |
| dc.subject | 61 |
| dc.title | Porous titanium-hydroxyapatite composite coating obtained on titanium by cold gas spray with high bond strength for biomedical applications |
| dc.type | info:eu-repo/semantics/article |
| dc.type | info:eu-repo/semantics/acceptedVersion |
Documentos relacionados
Otros documentos del mismo autor/a
Guillem Martí, Jordi; Cinca i Luis, Núria; Punset Fuste, Miquel; Garcia Cano, Irene; Gil Mur, Francisco Javier; Guilemany Casadamon, Josep Maria; Dosta, Sergi
Gil Mur, Francisco Javier; Punset Fuste, Miquel; Guillem Martí, Jordi; Molmeneu Trias, Meritxell; Calero, Jose Antonio
Caparrós Vázquez, Cristina Maria; Guillem Martí, Jordi; Molmeneu Trias, Meritxell; Punset Fuste, Miquel; Calero, J. A.; Gil Mur, Francisco Javier
Caparrós Vázquez, Cristina Maria; Guillem Martí, Jordi; Molmeneu Trias, Meritxell; Punset Fuste, Miquel; Gil Mur, Francisco Javier
Ortiz Hernández, Mónica; Rappe, K.; Molmeneu Trias, Meritxell; Mas Moruno, Carlos; Guillem Martí, Jordi; Punset Fuste, Miquel; Caparrós, Cristina; Calero Martínez, José Antonio; Franch, Jordi; Fernández Fairén, Mariano; Gil, Javier