Título:
|
Comparison of different devices for predicting the lean meat percentage of pig carcasses
|
Autor/a:
|
Font i Furnols, Maria; Gispert Martinell, Marina
|
Otros autores:
|
IRTA. Recerca i Tecnologia Agroalimentàries |
Resum:
|
Lean meat percentage (LMP) is the criterion for carcass classification and it must be measured on line objectively. The aim of this work was to compare the error of the prediction (RMSEP) of the LMP measured with the following different devices: Fat-O-Meat’er (FOM), UltraFOM (UFOM), AUTOFOM and -VCS2000. For this reason the same 99 carcasses were measured using all 4 apparatus and dissected according to the European Reference Method. Moreover a subsample of the carcasses (n=77) were fully scanned with a X-ray Computed Tomography equipment (CT). The RMSEP calculated with cross validation leave-one-out was lower for FOM and AUTOFOM (1.8% and 1.9%, respectively) and higher for UFOM and VCS2000 (2.3% for both devices). The error obtained with CT was the lowest (0.96%) in accordance with previous results, but CT cannot be used on line. It can be concluded that FOM and AUTOFOM presented better accuracy than UFOM and VCS2000. |
Fecha de creación:
|
06-2009 |
Materia(s):
|
Carn de porc -- Qualitat Tomografia |
Derechos:
|
Aquest document està subjecte a una llicència d'ús de Creative Commons, amb la qual es permet copiar, distribuir i comunicar públicament l'obra sempre que se'n citin l'autor original i l'IRTA i no se'n faci cap ús comercial ni obra derivada, tal com queda estipulat en la llicència d'ús (http://creativecommons.org/licenses/by-nc-nd/2.5/es/) |
Páginas:
|
13 p. |
Tipo de documento:
|
Artículo |
Editor:
|
Elsevier B.V.
|
Compartir:
|
|