This is an Accepted Manuscript of an article published by Taylor & Francis Group in Structure and Infrastructure Engineering on 2018, available online at: http://www.tandfonline.com/10.1080/15732479.2017.1406961

The accuracy of bridge system safety evaluations and reliability assessments obtained through refined structural and finite element analyses depends not only on the accuracy of the structural model itself but also on the proper modelling of the maximum traffic loads. While current code-specified live load models were calibrated to properly reflect the safety levels of bridge structures analysed using the simplified methods adopted in bridge design and evaluation manuals, these load models may not lead to accurate results when implemented during refined structural analysis procedures. This paper describes a method to calibrate appropriate live load models that can be used for advanced analyses of bridges. The calibration procedure is demonstrated using actual traffic data collected at a representative weigh-in-motion station in New York State. The proposed calibration methodology is applicable for developing live load models for different bridge service periods, bridge types and design/assessment codes or standards. Live load models obtained using the proposed calibration procedure are readily implementable for deterministic refined analyses of highway bridges to produce similar results to those of complex traffic load simulations. Examples are presented that describe how results of such calibrated live load models would be used in engineering practice.

Peer Reviewed