Para acceder a los documentos con el texto completo, por favor, siga el siguiente enlace: http://hdl.handle.net/2117/108065

Analysis of different surface structures of hard metal guiding stones in the honing process
Klein, Sven; Fang, Shiqi; Bähre, Dirk
Universitat Politècnica de Catalunya. Departament de Ciència dels Materials i Enginyeria Metal·lúrgica
Honing is a precise abrasive machining process with high standards for the resulting form, dimension, and surface quality. Additionally, honing further improves geometrical tolerances of the machined workpieces, especially when compared to the drilling process. In order to achieve a high adherence it is essential that the honing tool and the workpiece interact accordingly. The following paper will describe the static and dynamic correlations of the process forces of a honing tool equipped with one honing stone and two guiding stones for bores with small diameters (less than 20 mm). When working with bores of such small diameters, a direct measurement of the process forces with an integrated sensor is usually difficult to realize. Therefore, a theoretical model will be used to calculate the process forces within the honing tool. Missing coefficients of friction or tangential force coefficients (TFC) within the system will be determined with the help of an external test bench. Moreover, guiding stones made of hard metal with two different types of surfaces will be investigated and then compared with conventional guiding stones. The following measurement results are based on a MATLAB® simulation calculating the forces of the honing and guiding stones.
Peer Reviewed
Àrees temàtiques de la UPC::Enginyeria dels materials
Hard materials
Precision honing
Cutting force
Textured surface
Hard metal
Tangential force coefficient
Materials durs
Màquines-eines
Attribution-NonCommercial-NoDerivs 3.0 Spain
http://creativecommons.org/licenses/by-nc-nd/3.0/es/
info:eu-repo/semantics/publishedVersion
Artículo
         

Mostrar el registro completo del ítem

Documentos relacionados

Otros documentos del mismo autor/a

Fang, Shiqi; Herrmann, T; Rosenkranz, A; Gachot, C; García Marro, Fernando; Mücklich, Frank; Llanes Pitarch, Luis Miguel; Bähre, Dirk
Fang, Shiqi; Llanes Pitarch, Luis Miguel; Engstler, M.; Baehre, D.; Soldera, Flavio; Muecklich, F.