Modeling and simulation of a MMC-based solid-state transformer

Inici | Què és? | Contacte

English | Castellano

Consultar RECERCAT

Per comunitats i
col·leccions Per data Per autors Per títols Per matèries

Consultar col·lecció

Per data Per autors Per títols Per matèries

Estadístiques

Del document Tot RECERCAT

El meu RECERCAT

Entrar Alertes per correu-e

Directori d’altres repositoris

Pàgina inicial del RECERCAT > Universitat Politècnica de Catalunya > Documents de recerca > Visualitza document

Per accedir als documents amb el text complet, si us plau, seguiu el següent enllaç: http://hdl.handle.net/2117/105120

dc.contributor	Universitat Politècnica de Catalunya. Departament d'Enginyeria Elèctrica
dc.contributor	Universitat Politècnica de Catalunya. Departament d'Enginyeria Electrònica
dc.contributor.author	Adabi Firouzjaee, Mohammad Ebrahim
dc.contributor.author	Martínez Velasco, Juan Antonio
dc.contributor.author	Alepuz Menéndez, Salvador
dc.date	2017-02-16
dc.identifier.citation	Adabi Firouzjaee, M., Martinez, J., Alepuz, S. Modeling and simulation of a MMC-based solid-state transformer. "Electrical engineering", 16 Febrer 2017, vol. 100, núm. 2, p. 375-387.
dc.identifier.citation	0003-9039
dc.identifier.citation	10.1007/s00202-017-0510-x
dc.identifier.uri	http://hdl.handle.net/2117/105120
dc.language.iso	eng
dc.relation	http://link.springer.com/article/10.1007%2Fs00202-017-0510-x
dc.rights	info:eu-repo/semantics/openAccess
dc.subject	Àrees temàtiques de la UPC::Enginyeria elèctrica
dc.subject	Electric current converters
dc.subject	Bidirectional converter
dc.subject	Distribution system
dc.subject	Modular multilevel converter
dc.subject	Power quality
dc.subject	Solid-state transformer
dc.subject	Convertidors
dc.title	Modeling and simulation of a MMC-based solid-state transformer
dc.type	info:eu-repo/semantics/publishedVersion
dc.type	info:eu-repo/semantics/article
dc.description.abstract	This paper presents a model of a bidirectional MV/LV solid-state transformer (SST) for distribution system studies. A modular multilevel converter configuration is used in the MV side of the STT. The LV side uses a three-phase four-wire configuration that can be connected to both load and generation. The model developed for this work has been implemented in MATLAB/Simulink, and its behavior has been tested by carrying out several case studies under different operating conditions. The simulation results support the feasibility of the SST and its advantages in comparison to the conventional transformer. The paper also includes a discussion of the main model limitations and the future work.

Mostra el registre simple del document

Documents relacionats

Altres documents del mateix autor/a

Solid state transformer technologies and applications: a bibliographical survey

Adabi Firouzjaee, Mohammad Ebrahim; Martínez Velasco, Juan Antonio

EMTP model of a bidirectional cascaded multilevel solid state transformer for distribution system studies

Martín-Arnedo, Jacinto; Gonzalez Molina, Francisco; Martínez Velasco, Juan Antonio; Adabi Firouzjaee, Mohammad Ebrahim

Control strategies based on symmetrical components for grid-connected converters under voltage dips

Alepuz Menéndez, Salvador; Busquets Monge, Sergio; Bordonau Farrerons, José; Martínez Velasco, Juan Antonio; Silva, César A.; Pontt, Jorge; Rodríguez, José

2 transistors + 2 diodes-based PEBB designed for general applications in power electronics

Nicolás Apruzzese, Joan; Rocabert Delgado, Joan; Bordonau Farrerons, José; Busquets Monge, Sergio; Alepuz Menéndez, Salvador; Martínez Velasco, Juan Antonio; Peracaula Roura, Joan

Solid state transformer with low-voltage ride-through and current unbalance management capabilities

Alepuz Menéndez, Salvador; González, Francisco; Martín-Arnedo, Jacinto; Martínez Velasco, Juan Antonio

Accessibilitat | Avís legal | Política de Cookies | Documents d'ús intern

Coordinació

Patrocini