For maintenance needs, conservation and restoration, it has been requested by the Board of the SagradaFamilia, the study of the methodology and development to carry out the full three-dimensional model of the original part of the temple (the façade of the Birth, and the adjacent towers and chapels) and metric documents, including those who have to emphasize the architectonics planes, the digital orthomosaic of the different planes, and a full high-resolution surface model. The uniqueness of this façade is that it is an about 12 meters thick irregular element with spaces inside, which can be walked across most its outside spaces and inside the towers at different levels. High accuracy surveying methods are used for this project, which must be used as a basis to generate the necessary support network, considering that the topographic bases must be placed throughout all the façade, inside the temple, at different levels and in positions with good visibility.In the methodology they are considered combined methods of laser scanning and high resolution photogrammetry, which can generate equivalent and complementary point clouds.The areas that the laser scanner can’t reach, photogrammetry is used, and vice versa.Job success is due to a good coordination and planning of the various phases to execute (photographic shots, Terrestrial Laser Scanning, topographic bases distribution and support points, etc). This project is currently being carried out and the first results have been obtainedwholly satisfactory and above the highest expectations. The results have been point clouds of 2mm resolution for the sculptures and 5mm resolution for the architectural set made with the Terrestrial Laser Scanning technology, 5mm orthophotos with fotogrametry and a 3D mesh.