Para acceder a los documentos con el texto completo, por favor, siga el siguiente enlace: http://hdl.handle.net/2117/26509
Título: | Burden resistor selection in current transformers for low power applications |
---|---|
Autor/a: | Conesa Roca, Alfons; Bargalló Perpiñá, Ramón; Velasco Quesada, Guillermo; Román Lumbreras, Manuel |
Otros autores: | Escola Universitària d'Enginyeria Tècnica Industrial de Barcelona; Universitat Politècnica de Catalunya. Departament d'Enginyeria Elèctrica; Universitat Politècnica de Catalunya. Departament d'Enginyeria Electrònica; Universitat Politècnica de Catalunya. EPIC - Energy Processing and Integrated Circuits; Universitat Politècnica de Catalunya. QSE - Qualitat del Subministrament Elèctric; Universitat Politècnica de Catalunya. GREP - Grup de Recerca en Electrònica de Potència |
Abstract: | In order to sense AC current with electric isolation in high frequency switching power converters the most simple and low cost solution is to consider a current transformer with a burden resistor. But burden resistor selection is not a simple task because involves a lot of considerations that affect the output voltage and its signal-to-noise ratio and the bandwidth of the measure. In this paper, considering the basic equations of the transformer and applying the Laplace Transformation is obtained a simple model of the current transformer interesting to select burden resistor and even to design the current transformer in case of high frequency applications |
Materia(s): | -Àrees temàtiques de la UPC::Enginyeria electrònica -Industrial electronics -Electronic control -Current measurement -current transformer -burden resistor -Control electrònic -Electrònica industrial |
Derechos: | Attribution-NonCommercial-NoDerivs 3.0 Spain
http://creativecommons.org/licenses/by-nc-nd/3.0/es/ |
Tipo de documento: | Artículo - Versión publicada Objeto de conferencia |
Editor: | Universitat Rovira i Virgili |
Compartir: |