Abstract:
|
En España, la mayoría de los edificios de hormigón armado son de forjados reticulares y los cerramientos en estos edificios se suelen materializar con paredes de fábrica que rellenan los marcos entre pilares y forjados. Estas paredes no son portantes y, generalmente, no se considera su contribución resistente ante cargas gravita-
torias. No obstante, ante acciones laterales (sismo o viento) la existencia o no de estas paredes puede influir en la respuesta de la estructura. El objetivo de este trabajo es conocer la influencia de la tabiquería en la respuesta sísmica. A partir de planos estructurales reales se define un edificio tipo de 8 plantas, se evalúa su capacidad y
respuesta sísmica con y sin tabiquería mediante un análisis estático no lineal. Los resultados muestran la influencia de las paredes en el comportamiento de la estructura frente a cargas laterales, tanto en su rigidez como en su capacidad resistente.
The seismic behaviour of a very common building typology in Spain, reinforced concrete (RC) frame buildings, is inves-
tigated. Usually, divisions in these buildings are made by means of non-bearing masonry infill walls. It is the traditional practice not to consider the contribution of these in the resisting mechanism, especially for gravitational loads. However, under lateral loading, such as wind or earthquake, the existence or not of these infill walls may significantly influence the structural response. The objective of this paper is to know the influence of masonry infill walls in the seismic response of RC buildings. Based on structural details of a series of real drawings, an 8 stories reference building was defined and by means of non-linear static analysis, structural response and capacity with and without infill walls are evaluated. The results shown that infill walls are determinant in the structural behaviour against lateral loads, both in terms of stiffness and resistance. |