The paper deals with an experimental investigation of water retention properties of a statically compacted unsaturated low plasticity silt. The objective is a deeper understanding of the evolution of an aggregate type fabric at different initial conditions in terms of void ratio and water content. A series of Mercury Intrusion Porosimetry tests (MIP) were performed to provide information about factors influencing fabric changes (effect of mechanical stress due to sample compaction) and fabric-properties relationships (water retention curve related to porosimetry). The arrangements of aggregation/particles are also investigated with Environmental Scanning Electron Microscopy (ESEM). The experimental data has been used to calibrate a multimodal water retention model for aggregate which is obtained by linear superposition of sub-curves of the van Genuchten type modified. By comparing the WRC obtained by MIP and under suction controlled conditions it has been found a good agreement between the two method for the drying path.