Para acceder a los documentos con el texto completo, por favor, siga el siguiente enlace: http://hdl.handle.net/2117/18714
dc.contributor | Universitat Politècnica de Catalunya. Departament de Ciència dels Materials i Enginyeria Metal·lúrgica |
---|---|
dc.contributor | Universitat Politècnica de Catalunya. PROCOMAME - Processos de Conformació de Materials Metàl·lics |
dc.contributor.author | Reyes Calderón, F. |
dc.contributor.author | Mejía Granados, Ignacio |
dc.contributor.author | Boulaajaj, A. |
dc.contributor.author | Cabrera Marrero, José M. |
dc.date | 2013 |
dc.identifier.citation | Reyes, F. [et al.]. Effect of microalloying elements (Nb, V and Ti) on the hot flow behavior of high-Mn austenitic twinning induced plasticity (TWIP) steel. "Materials science and engineering A. Structural materials properties microstructure and processing", 2013, vol. 560, p. 552-560. |
dc.identifier.citation | 0921-5093 |
dc.identifier.citation | 10.1016/j.msea.2012.09.101 |
dc.identifier.uri | http://hdl.handle.net/2117/18714 |
dc.description.abstract | This research work studies the effect of microalloying elements such as Nb, V and Ti on the hot flow behavior of high-Mn austenitic TWIP steel. For this purpose, isothermal uniaxial hot compression tests were carried out at three temperatures (900, 1000 and 1100 1 C) and four constant strain rates (10 1 , 10 2 ,10 3 and 10 4 s 1 ). Experimental results revealed that hot flow curves of microalloyed TWIP steels show single peak curves for all test conditions. Results are discussed in terms of the peak stress ( s p ) and peak strain ( e p ) and its dependence on the strain rate ( _ e ) and temperature. The addition of microalloying elements such as Nb, V and Ti in TWIP steels generates a slight increase in the s p value, and Ti microalloyed TWIP steel exhibits the highest s p value. Hot deformed microstructures were analyzed by the Electron Back-Scattering Diffraction Technique (EBSD). The most important results of the austenitic recrystallized grain refinement were obtained for V and Ti microalloyed TWIP steels. |
dc.description.abstract | Peer Reviewed |
dc.language.iso | eng |
dc.rights | Attribution-NonCommercial-NoDerivs 3.0 Spain |
dc.rights | info:eu-repo/semantics/openAccess |
dc.rights | http://creativecommons.org/licenses/by-nc-nd/3.0/es/ |
dc.subject | Àrees temàtiques de la UPC::Enginyeria dels materials |
dc.subject | Steel |
dc.subject | Acer d'alta resistència |
dc.title | Effect of microalloying elements (Nb, V and Ti) on the hot flow behavior of high-Mn austenitic twinning induced plasticity (TWIP) steel |
dc.type | info:eu-repo/semantics/publishedVersion |
dc.type | info:eu-repo/semantics/article |