Reduction of the common mode voltage of a matrix converter fed direct torque control

Consultar RECERCAT

Para acceder a los documentos con el texto completo, por favor, siga el siguiente enlace: http://hdl.handle.net/2117/11296

Título:	Reduction of the common mode voltage of a matrix converter fed direct torque control
Autor/a:	Ortega García, Carlos; Arias Pujol, Antoni; Caruana, Cedric; Apap, Maurice
Otros autores:	Universitat Politècnica de Catalunya. Departament d'Enginyeria Electrònica; Universitat Politècnica de Catalunya. TIEG - Terrassa Industrial Electronics Group
Abstract:	The work presented in this paper proposes an approach to reduce the common mode voltage at the output of matrix converters when a direct torque control scheme is employed to drive a permanent magnet synchronous motor. A mathematical analysis of the common mode voltage at the output of matrix converters is ﬁrstly carried out which is then corroborated by simulation results. Based on this ana- lysis, a very simple algorithm to reduce the common mode voltage is proposed and investigated. Finally, experimental results corroborating the eﬀectiveness of the proposed method are shown.
Materia(s):	-Àrees temàtiques de la UPC::Enginyeria electrònica::Electrònica de potència -Electric current converters -Convertidors altern-continu
Derechos:
Tipo de documento:	Artículo - Versión publicada Artículo
Compartir:

Espina Masramon, Jorge; Balcells Sendra, Josep; Ortega García, Carlos; Arias Pujol, Antoni; de Lillo, Liliana; Empringham, Lee

Espina Masramon, Jorge; Balcells Sendra, Josep; Arias Pujol, Antoni; Ortega García, Carlos; González Díez, David; Gago Barrio, Javier

Ortega García, Carlos; Arias Pujol, Antoni; Espina, Jordi

Espina Masramon, Jorge; Arias Pujol, Antoni; Balcells Sendra, Josep; Ortega García, Carlos; Galceran Arellano, Samuel

Espina Masramon, Jorge; Arias Pujol, Antoni; Balcells Sendra, Josep; Ortega García, Carlos

Coordinación

Patrocinio