Pàgina inicial del RECERCAT
>
Universitat Politècnica de Catalunya
>
Documents de recerca
>
Visualitza document
Per accedir als documents amb el text complet, si us plau, seguiu el següent enllaç: http://hdl.handle.net/2117/11193
| dc.contributor | Universitat Politècnica de Catalunya. Departament d'Enginyeria Elèctrica |
|---|---|
| dc.contributor | Universitat Politècnica de Catalunya. GAECE - Grup d'Accionaments Elèctrics amb Commutació Electrònica |
| dc.contributor.author | Torrent Burgués, Marcel |
| dc.contributor.author | Andrada Gascón, Pedro |
| dc.contributor.author | Blanqué Molina, Balduino |
| dc.contributor.author | Martínez Piera, Eusebio |
| dc.contributor.author | Perat Benavides, Josep Ignasi |
| dc.contributor.author | Sánchez López, José Antonio |
| dc.date | 2010-07-12 |
| dc.identifier.citation | Torrent, M. [et al.]. Method for estimating core losses in switched reluctance motors. "European transactions on electrical power", 12 Juliol 2010. |
| dc.identifier.citation | 1430-144X |
| dc.identifier.citation | 10.1002/etep.475 |
| dc.identifier.uri | http://hdl.handle.net/2117/11193 |
| dc.description.abstract | The prediction of switched reluctance motor (SRM) performance requires knowledge of core losses.However, the calculation of iron losses in SRM is especially complex first because the flux waveforms arenonsinusoidal and different parts of the magnetic circuit have different waveforms and second because theyare conditioned by the type of control used. This study proposes an analytical method for calculating corelosses that comprises simulation of the SRM using finite element analysis to determine the magnetizationcurves, and SRM modeling, which enables transient simulations with the associated electronic powerconverter run under different control strategies. The flux density waveforms in the different parts of the SRMare derived from the flux density waveform of the stator pole that is obtained from the transient simulation.The specific core losses (in W/kg) are separated into three parts (hysteresis losses, classical eddy currentlosses and excess losses) and calculated using the waveforms and time derivatives of the local flux density.The core losses for each part of the SRM’s magnetic circuit can be estimated using the calculated values forspecific hysteresis losses, specific classical eddy current losses and specific excess losses for each zone.Adding these individual losses yields the total core losses. The method was applied to three-phase 6/4 SRM,and the calculated results were compared with experimentally obtained measurements. |
| dc.language.iso | eng |
| dc.rights | Attribution-NonCommercial-NoDerivs 3.0 Spain |
| dc.rights | info:eu-repo/semantics/openAccess |
| dc.rights | http://creativecommons.org/licenses/by-nc-nd/3.0/es/ |
| dc.subject | Àrees temàtiques de la UPC::Enginyeria mecànica::Motors::Motors elèctrics |
| dc.subject | Reluctance motors |
| dc.subject | Electric motors |
| dc.subject | Motors elèctrics -- Control |
| dc.subject | Motors de reluctància -- Control |
| dc.title | Method for estimating core losses in switched reluctance motors |
| dc.type | info:eu-repo/semantics/publishedVersion |
| dc.type | info:eu-repo/semantics/article |
Documents relacionats
Altres documents del mateix autor/a
Andrada Gascón, Pedro; Blanqué Molina, Balduino; Perat Benavides, Josep Ignasi; Torrent Burgués, Marcel; Martínez Piera, Eusebio; Sánchez López, José Antonio
Andrada Gascón, Pedro; Blanqué Molina, Balduino; Martínez Piera, Eusebio; Perat Benavides, Josep Ignasi; Sánchez López, José Antonio; Torrent Burgués, Marcel
Andrada Gascón, Pedro; Blanqué Molina, Balduino; Martínez Piera, Eusebio; Torrent Burgués, Marcel; Sánchez López, José Antonio; Perat Benavides, Josep Ignasi
Andrada Gascón, Pedro; Blanqué Molina, Balduino; Martínez Piera, Eusebio; Torrent Burgués, Marcel; Sánchez López, José Antonio; Perat Benavides, Josep Ignasi
Andrada Gascón, Pedro; Blanqué Molina, Balduino; Martínez Piera, Eusebio; Torrent Burgués, Marcel; Sánchez López, José Antonio; Perat Benavides, Josep Ignasi