2026-04-17T06:50:43Zhttps://recercat.cat/oai/request
oai:recercat.cat:2445/1394232025-12-04T19:34:52Zcom_2072_1057col_2072_478813col_2072_478917
RECERCAT author Rojas-Romo, Carlos author Serrano i Plana, Núria author Ariño Blasco, Cristina author Arancibia, Verónica author Díaz Cruz, José Manuel author Esteban i Cortada, Miquel 2019-09-06T07:42:46Z2019-09-06T07:42:46Z2016-04-062019-09-06T07:42:47Z The determination of Sb(III) on an ex-situ bismuth screen-printed carbon electrode (ex-situ BiSPCE) by means of adsorptive stripping voltammetry (AdSV) using quercetin-5′-sulfonic acid as chelating agent was optimized. The effect of different experimental parameters such pH, ligand concentration (CQSA), accumulation potential (Eacc) and accumulation time (tacc) were studied to obtain a wide linear range, the highest sensitivity and the lowest detection limit. Ex-situ BiSPCE was analytically compared with a sputtered bismuth screen-printed electrode (BispSPE) under optimal conditions. The obtained analytical parameters suggest that ex-situ BiSPCE behaves much better than BispSPE and the first was selected for this study. Optimal parameters were pH=4.6; CQSA=10.0 to 20.0×10−6 mol L−1; Eacc=−0.5 V and tacc=60 s. Peak area is proportional to Sb(III) concentration up to 100.0 μg L−1 (tacc 60 s) and 45.0 μg L−1 (tacc 120 s) range, with detection limits of 1.2 μg L−1 (tacc 60 s) and 0.8 μg L−1 (tacc 120 s). The relative standard deviation for a Sb(III) solution (20.0 μg L−1) was 3.9% for ten successive assays. Thus, the effect of various interfering metal ions was studied and the methodology was validated using a spiked groundwater reference material with very satisfactory results. cc-by-nc-nd (c) Elsevier B.V., 2016 http://creativecommons.org/licenses/by-nc-nd/3.0/es info:eu-repo/semantics/openAccess Voltametria Electroquímica Anàlisi electroquímica Voltammetry Electrochemistry Electrochemical analysis Determination of Sb(III) using an ex-situ bismuth screen-printed carbon electrode by adsorptive stripping voltammetry info:eu-repo/semantics/article info:eu-repo/semantics/acceptedVersion