2026-04-13T04:48:58Zhttps://recercat.cat/oai/request
oai:recercat.cat:2117/4283522026-02-04T08:30:29Zcom_2072_1033col_2072_452950
RECERCAT author Navarrete, Iván author Tošić, Nikola author Hermida Arias, José Luis author Saavedra Sáenz, Ruth Danni author Etxeberria Larrañaga, Miren 2024-12 Additive manufacturing of concrete (3D printed concrete, 3DPC), is an emerging technology with numerous possible applications and benefits for the digital transition of the construction industry. At the same time, there remain open questions about the environmental suitability of 3DPC. One such aspect is its circularity, i.e. recyclability. Therefore, in this study, the viability of recycling 3DPC is studied on normal- and high-strength 3DPC concretes produced with 0–100% of fine recycled aggregate (fRA). After testing for basic mechanical properties, the specimens were crushed and new (2nd generation) fRA were obtained and tested. The results point to a high potential for recyclability of 3DPC and fRA conducive to multi-recycling and CO2 uptake through carbonation.Peer ReviewedPostprint (published version) http://creativecommons.org/licenses/by/4.0/ Open Access Attribution 4.0 International Àrees temàtiques de la UPC::Enginyeria civil::Materials i estructures::Materials i estructures de formigó Additive manufacturing Multi-recycling Density Water absorption 3D printed concrete as a source of recycled aggregates: potential for multi-recycling and CO2 sequestration Hormigón impreso en 3D como fuente de áridos reciclados: potencial de multireciclaje y secuestro de CO2 Article