2026-04-05T11:50:20Zhttps://recercat.cat/oai/request

oai:recercat.cat:2117/1882902025-07-16T22:16:14Zcom_2072_1033col_2072_452949

Numerical modeling of metal cutting processes using the particle finite element method (PFEM) and a physically based plasticity model Rodríguez, J. M. Jonsén, P. Svoboda, A. Finite element method Computational methods in mechanics Particle methods (Numerical analysis) Particle Finite Element Method, Dislocation density constitutive models, Metal cutting Elements finits, Mètode dels Metal cutting is one of the most common metal shaping processes. Specified geometrical and surface properties are obtained by break-up of material and removal by a cutting edge into a chip. The chip formation is associated with large strain, high strain rate and locally high temperature due to adiabatic heating which make the modeling of cutting processes difficult. Furthermore, dissipative plastic and friction work generate high local temperatures. These phenomena together with numerical complications make modeling of metal cutting difficult. Material models, which are crucial in metal cutting simulations, are usually calibrated based on data from material testing. Nevertheless, the magnitude of strain and strain rate involved in metal cutting are several orders higher than those generated from conventional material testing. Therefore, a highly desirable feature is a material model that can be extrapolated outside the calibration range. In this study a physically based plasticity model based on dislocation density and vacancy concentration is used to simulate orthogonal metal cutting of AISI 316L. The material model is implemented into an in-house Particle Finite Element Method software. Numerical simulations are in agreement with experimental results, but also with previous results obtained with the finite element method. 2015 Conference report Open Access CIMNE