2026-04-14T02:10:06Zhttps://recercat.cat/oai/request

oai:recercat.cat:10459.1/477472024-12-05T22:22:39Zcom_2072_3622col_2072_479130

Free-cooling of buildings with phase change materials Refroidissement natruel d’immeubles a` l’aide de mate´riaux changement de phase Zalba, Belén Marín, José M. Cabeza, Luisa F. Mehling, Harald Air conditioning Residential building Modelling In this paper, the application of phase change materials (PCM) in free-cooling systems is studied. Free-cooling is understood as a means to store outdoors coolness during the night, to supply indoors cooling during the day. The use of PCMs is suitable because of the small temperature difference between day indoors and night outdoors. An installation that allows testing the performance of PCMs in such systems was designed and constructed. The main influence parameters like ratio of energy/volume in the encapsulates, load/unload rate of the storage, and cost of the installation were determined, and experiments were performed following the design of experiments strategy. The statistical analysis showed that the effects with significant influence in the solidification process are the thickness of the encapsulation, the inlet temperature of the air, the air flow, and the interaction thickness X temperature. For the melting process the same holds, but the inlet air temperature had a higher influence than the thickness of the encapsulation. With the empirical model developed in this work, a real free-cooling system was designed and economically evaluated. 2024-12-05T22:22:39Z 2024-12-05T22:22:39Z 2024-12-05T22:22:39Z 2015-01-28T09:29:39Z 2025-01-01 2004 article publishedVersion http://hdl.handle.net/10459.1/47747 Reproducció del document publicat a https://doi.org/10.1016/j.ijrefrig.2004.03.015 International Journal of Refrigeration, 2004, núm. 27, p. 839–849 (c) Elsevier, 2004 info:eu-repo/semantics/restrictedAccess Elsevier