2026-04-04T04:59:24Zhttps://recercat.cat/oai/requestoai:recercat.cat:10256/258882024-12-20T10:30:21Zcom_2072_452955com_2072_2054col_2072_453061
RECERCAT
author
Ferrer Real, Inés
author
Ríos Chueco, José
author
Ciurana, Quim de
author
Garcia-Romeu, Maria Luisa
2024-12-20T10:30:21Z
2024-12-20T10:30:21Z
2010-10
http://hdl.handle.net/10256/25888
Design for manufacturing (DFM) practices lead to more competitive products from the point of view of cost, development time and quality. However, the success of considering manufacturing issues during design process would be higher if manufacturing information was more readily available and designers needed less experience to select information relevant to DFM.
This paper presents a method for identifying and formalizing the relevant manufacturing information that designer should have available for DFM. The method is based on the Axiomatic Design theory [1]. It helps the designer capture the relationship between design and manufacturing information. The information related to obtaining the design parameters that achieve product functionalities is the most relevant DFM information. A case study where the method is applied to the design of a connecting rod for an alternative internal combustion engine is presented. The manufacturing processes considered were hot closed die forging and powder metallurgy
Attribution-NonCommercial-NoDerivatives 4.0 International http://creativecommons.org/licenses/by-nc-nd/4.0/ info:eu-repo/semantics/openAccess
Fabricació
Manufacturing processes
Disseny industrial
Industrial design
Disseny de sistemes
System design
Methodology for capturing and formalizing DFM Knowledge
info:eu-repo/semantics/article info:eu-repo/semantics/acceptedVersion peer-reviewed