dc.contributor |
Universitat Politècnica de Catalunya. Departament d'Enginyeria Civil i Ambiental |
dc.contributor |
Romero Morales, Enrique Edgar |
dc.contributor.author |
Sossa Arancibia, Fernando Alejandro |
dc.coverage.spatial |
east=0.743776099999991; north=41.44886489999999; name=L'Albagés, Lleida, Espanya |
dc.date |
2017-09-20 |
dc.identifier.citation |
PRISMA-128592 |
dc.identifier.uri |
http://hdl.handle.net/2117/111265 |
dc.language.iso |
spa |
dc.publisher |
Universitat Politècnica de Catalunya |
dc.rights |
info:eu-repo/semantics/openAccess |
dc.subject |
Àrees temàtiques de la UPC::Enginyeria civil::Enginyeria hidràulica, marítima i sanitària::Embassaments i preses |
dc.subject |
Barrages; Dams |
dc.subject |
Preses (Enginyeria) -- Catalunya |
dc.title |
Caracterización hidro-mecánica de materiales compactados de núcleo, de espaldón y material grueso para la presa de l'Albagés |
dc.type |
info:eu-repo/semantics/masterThesis |
dc.description.abstract |
The present TFM aims at the hydraulic and mechanical characterization of different compacted
materials, retrieved from the Albagés dam during the construction process. The 85 m high dam
began to be constructed in the province of Lleida on early 2015 and was completed in 2017.
The dam section is constituted by core of clayey silt, which is protected by shoulders of argillite /
sandstone and a wedge of coarse material located on the outside of the upstream shoulder.
To properly analyze the results, previous reports of the characterization of the dam materials
are studied and their results and parameters are critically assessed with new tests of this MSc
thesis corresponding to materials compacted under in situ conditions. The previous reports
corresponded to the laboratory tests of the initial project, to an earth embankment test to study
the compaction state of the core and shoulder materials, as well as to a report of the
characterization of materials from field tests.
Several hydraulic and mechanical tests have been carried out on three materials, which
correspond to the core, the shoulders and the coarse material of the upstream wedge, which
are referred to in this thesis as 'core material', 'all-one material' and ‘coarse material',
respectively. The core material has been retrieved from intact core samples from field
compacted embankments, while the other materials have been compacted in the laboratory to
ensure conditions close to in situ compaction.
The interpretation of these tests has allowed obtaining elasto-plastic mechanical parameters
associated with the compressibility under stress and degree of saturation changes, long-term
deformation properties, shear strength, as well as hydraulic parameters such as water
permeability and water retention curve. This HM characterization is required for better assessing
parameters to be used in coupled stability analyses of the dam along the different construction
stages, as well as in the analysis of long-term post-construction behavior. |
dc.description.abstract |
El presente TFM tiene como objeto la caracterización hidráulica y mecánica de diferentes materiales compactados, extraídos de la presa de l’Albagés durante el proceso de construcción. La presa de 85 m de alto se empezó a construir en la provincia de Lleida a principios de 2015 y se terminó en 2017. La sección de la presa está constituida por un núcleo impermeable de arcilla limosa, protegido por espaldones de material todo-uno de argilita / arenisca y de una cuña de material de granulometría gruesa situado en la parte exterior del espaldón aguas arriba. Con el fin de analizar objetivamente los resultados, se estudian informes previos de caracterización de los materiales de la presa y se comparan de forma crítica sus resultados y parámetros con los nuevos ensayos realizados en la tesina de los materiales con compactación in situ. Los informes previos corresponden a los ensayos de laboratorio del proyecto inicial, a un terraplén de prueba donde se analizaron las condiciones de compactación de los materiales de núcleo y de espaldón, así como a un informe de caracterización de materiales a partir de ensayos de campo. Se realizan distintos ensayos hidráulicos y mecánicos sobre los tres materiales, que forman el núcleo, los espaldones y la cuña aguas arriba, que en esta tesina se los denomina e identifica como ‘material de núcleo’, ‘material todo-uno’ y ‘material gruesos’, respectivamente. El material de núcleo se ha extraído de testigos de diferentes zonas de compactación en campo, mientras que los otros materiales se han compactado en laboratorio para garantizar condiciones lo más cercanas a la compactación in situ. La interpretación de estos ensayos ha permitido obtener parámetros mecánicos de comportamiento elasto-plástico de compresibilidad ante carga y cambios de saturación, de deformación secundaria, de resistencia al corte, así como de parámetros hidráulicos como permeabilidad y curva de retención al agua. Esta caracterización HM se requiere para la definición de los parámetros de cálculo a utilizar en un análisis acoplado de estabilidad de la presa a lo largo de las distintas etapas constructivas, así como en el análisis del comportamiento a largo plazo post-construcción. |