To access the full text documents, please follow this link: http://hdl.handle.net/2117/27276
dc.contributor | Universitat Politècnica de Catalunya. Departament de Construccions Arquitectòniques II |
---|---|
dc.contributor | Universitat Politècnica de Catalunya. GICITED - Grup Interdiciplinari de Ciència i Tecnologia en l'Edificació |
dc.contributor.author | Montón Lecumberri, Joaquín |
dc.contributor.author | Segués Aguasca, Edgar |
dc.contributor.author | Iñiguez-Gonzalez, Guillermo |
dc.contributor.author | Arriaga Martitegui, Francisco |
dc.date | 2015 |
dc.identifier.citation | Monton, J. [et al.]. In-situ assesment of structural timber density using non-destructive and semi-destructive testing. "Bioresources", 2015, vol. 10, núm. 2, p. 2256-2265. |
dc.identifier.citation | 1930-2126 |
dc.identifier.uri | http://hdl.handle.net/2117/27276 |
dc.description.abstract | Both non-destructive and semi-destructive tests can potentially be very efficient methods for the assessment of structural timber density. This paper describes an investigation into the suitability of three techniques: core drilling, probing, and screw withdrawal. It presents the results after testing 150 pieces of large cross-section (80 mm x 120 mm) structural timber of radiata pine (Pinus radiata D. Don.) from a Spanish source. A strong correlation was found between specimen density and core drilling. Meanwhile, there was also a meaningful correlation with the screw withdrawal, and an acceptable correlation with probing. Even though differences were observed in their predictive capacity, none of these procedures should be rejected as a way of estimating density, as each has its own respective advantages and limitations. |
dc.description.abstract | Peer Reviewed |
dc.language.iso | eng |
dc.relation | http://www.ncsu.edu/bioresources/BioRes_10/BioRes_10_2_2256_Gonzalez__InSitu_Assess_Struct_Timber_Density_Non_Semi_6694.pdf |
dc.rights | Attribution-NonCommercial-NoDerivs 3.0 Spain |
dc.rights | info:eu-repo/semantics/openAccess |
dc.rights | http://creativecommons.org/licenses/by-nc-nd/3.0/es/ |
dc.subject | Àrees temàtiques de la UPC::Edificació::Materials de construcció::Fusta |
dc.subject | Àrees temàtiques de la UPC::Enginyeria dels materials::Assaig de materials |
dc.subject | Wood |
dc.subject | Non-destructive testing |
dc.subject | Core drilling |
dc.subject | Density |
dc.subject | In-situ assesment |
dc.subject | Probing |
dc.subject | Screw withdrawal |
dc.subject | Timber |
dc.subject | Fusta |
dc.subject | Assaigs no destructius |
dc.title | In-situ assesment of structural timber density using non-destructive and semi-destructive testing |
dc.type | info:eu-repo/semantics/publishedVersion |
dc.type | info:eu-repo/semantics/article |