Para acceder a los documentos con el texto completo, por favor, siga el siguiente enlace: http://hdl.handle.net/10256/9440

Deinking flotation of recycled linerboard for food packaging applications
Jamnicki, Sonja; Pèlach Serra, Maria Àngels; Lozo, Branka; Stanic, Maja; Barusic, Lidija
Brown packaging linerboard, made entirely from recovered pulp, was subjected to deinking flotation for evaluating the possible improvements in its chemical, optical and mechanical properties. The increase in the rate of recovered paper utilisation, along with the tendency towards lower basis weights, in the packaging paper production, has created a growing need for the utilisation of secondary fibers of improved quality. To attain better quality fibers, flotation deinking of brown grades is being considered, along with the addition of primary fibers to recovered paper furnish. Numerous conducted studies, in which the flotation technology was used in the treatment of brown grades, support this idea. Most of them show that the quality of fibers is improved after flotation deinking, resulting in higher mechanical properties of the deinked handsheets and in lower amounts of chemical contaminants. As to food and human health safety, packaging paper has to meet specific requirements, to be classified as suitable for its direct contact with foods. Recycled paper and board may contain many potential contaminants, which, especially in the case of direct food contact, may migrate from packaging materials into foodstuffs. In this work, the linerboard sample selected for deinking was made from recycled fibers not submitted previously to chemical deinking flotation. Therefore, the original sample contained many noncellulosic components, as well as the residues of printing inks. The studied linerboardsample was a type of packaging paper used for contact with food products that are usually peeled before use, e.g. fruits and vegetables. The decrease in the amount of chemical contaminants, after conducting deinking flotation, was evaluated, along with the changes in the mechanical and optical properties of the deinked handsheets. Food contact analysis was done on both the original paper samples and the filter pads and handsheets made before and after deinking flotation. Food contact analysis consisted of migration tests of brightening agents, colorants, PCPs, formaldehydes and metals. Microbiological tests were also performed to determine the possible transfer of antimicrobial constituents
Envasos d'aliments
Food containers
Cartó
Paperboard
Tots els drets reservats
Artículo
info:eu-repo/semantics/publishedVersion
Editura Academiei Romane
         

Mostrar el registro completo del ítem

Documentos relacionados

Otros documentos del mismo autor/a

Vilaseca Morera, Fabiola; Puig Serramitja, Josep; Pèlach Serra, Maria Àngels; El Mansouri, Nour-Eddine; Alcalà Vilavella, Manel; Roux, Jean-Claude; Mutjé Pujol, Pere
Vilaseca Morera, Fabiola; Puig, Josep; Pèlach Serra, Maria Àngels; El Mansouri, Nour-Eddine; Alcalà Vilavella, Manuel; Roux, Jean-Claude; Mutjé Pujol, Pere
Vilaseca Morera, Fabiola; Puig Serramitja, Josep; Pèlach Serra, Maria Àngels; El Mansouri, Nour-Eddine; Alcalà Vilavella, Manuel; Roux, Jean-Claude; Mutjé Pujol, Pere
Costa, M.M.; Santos, C.A.; García, J.C.; Barberà, L.; Vilaseca Morera, Fabiola; Pèlach Serra, Maria Àngels; Mutjé Pujol, Pere; Colodette, J.L.
Delgado Aguilar, Marc; González Tovar, Israel; Tarrés Farrés, Quim; Alcalà Vilavella, Manel; Pèlach Serra, Maria Àngels; Mutjé Pujol, Pere