Per accedir als documents amb el text complet, si us plau, seguiu el següent enllaç: http://hdl.handle.net/2117/17526

Characterization of test results of the performance of additive manufacturing parts obtained by selective laser sintering processes incorporating glass and carbon fibres
Roure Fernández, Francisco; Pastor Artigues, María Magdalena; Ferrer Ballester, Miquel; Minguella Canela, Joaquim; Uceda Molera, R.; Arjona Mora, A.
Universitat Politècnica de Catalunya. Departament de Resistència dels Materials i Estructures en Enginyeria; Universitat Politècnica de Catalunya. Departament d'Enginyeria Mecànica; Universitat Politècnica de Catalunya. REMM - Grup de Recerca en Estructures i Mecànica de Materials; Universitat Politècnica de Catalunya. TECNOFAB - Grup de Recerca en Tecnologies de Fabricació
Selective Laser Sintering, and in general Additive Manufacturing Processes are becoming mature technologies; in the sense that after many years of market introduction there are some well-known manufacturers that provide fully operative systems that are even utilized for direct parts manufacturing. However, the parts final users are becoming more and more demanding, so they can integrate the AM parts in complex assemblies; thus increasing the materials requirements and the final part’s properties. Building into previous works on AM materials, the purpose of the present paper is to explore the properties yielded by the introduction of Glass short fibre randomly to polyamide and to assess the performance of the probe parts taking into consideration the AM manufacturing direction in the building platform and the Energy Density applyied to the operations. Folowing to a literature review, the paper first describes the statistical approach and the samples preparation. Then, the samples are characterized by tensile tests and the properties of the material are described for the different manufacturing strategies adopted. The outcomes of the work are highly applicable to the AM parts manufacture process, as the construction of parts in the building platform is usually dictated by the objective of optimizing the use of the total volume; thus implying that not all parts are manufactured in the same main construction direction.
Àrees temàtiques de la UPC::Enginyeria mecànica::Fabricació
Prototypes, Engineering
Enginyeria de prototipus
info:eu-repo/semantics/publishedVersion
info:eu-repo/semantics/conferenceObject
         

Mostra el registre complet del document

Documents relacionats

Altres documents del mateix autor/a

Roure Fernández, Francisco; Pastor Artigues, María Magdalena; Bonada Bo, Jordi; Casafont Ribera, Miguel; Minguella Canela, Joaquim
Casafont Ribera, Miguel; Marimón Carvajal, Federico; Pastor Artigues, María Magdalena; Ferrer Ballester, Miquel
Casafont Ribera, Miguel; Bonada Bo, Jordi; Pastor Artigues, María Magdalena; Roure Fernández, Francisco
Roure Fernández, Francisco; Pastor Artigues, María Magdalena; Bonada Bo, Jordi; Rodero de Lamo, Lourdes