Impact behaviour of carbon fibre reinforced epoxy and non-isothermal cyclic butylene terephthalate composites manufactured by vacuum infusion

Inicio | ¿Qué es? | Contacto

English | Català

Consultar RECERCAT

Por comunidades y
colecciones Por fecha Por autores Por títulos Por temas (CDU)

Consultar departamento

Por fecha Por autores Por títulos Por temas (CDU)

Estadisticas

Del documento Todo RECERCAT

Mi RECERCAT

Entrar Alertas por correo-e

Directorio de otros repositorios

RECERCAT Principal > Universitat Politècnica de Catalunya > Documents de recerca > Visualizar documento

Para acceder a los documentos con el texto completo, por favor, siga el siguiente enlace: http://hdl.handle.net/2117/16658

dc.contributor	Universitat Politècnica de Catalunya. Departament de Ciència dels Materials i Enginyeria Metal·lúrgica
dc.contributor	Universitat Politècnica de Catalunya. POLYCOM - Polimers i compòsits: tecnologia
dc.contributor.author	Agirregomezkorta, A.
dc.contributor.author	Martínez Benasat, Antonio
dc.contributor.author	Sánchez Soto, Miguel
dc.contributor.author	Aretxaga, G.
dc.contributor.author	Sarrionandia, Mariasun
dc.contributor.author	Aurrekoetxea, J.
dc.date	2011-07
dc.identifier.citation	Agirregomezkorta, A. [et al.]. Impact behaviour of carbon fibre reinforced epoxy and non-isothermal cyclic butylene terephthalate composites manufactured by vacuum infusion. "Composites Part B: Engineering", Juliol 2011, vol. 43, núm. 5, p. 2249-2256.
dc.identifier.citation	1359-8368
dc.identifier.citation	10.1016/j.compositesb.2012.01.091
dc.identifier.uri	http://hdl.handle.net/2117/16658
dc.language.iso	eng
dc.publisher	Elsevier
dc.relation	http://www.sciencedirect.com/science/article/pii/S1359836812002302#
dc.rights	Attribution-NonCommercial-NoDerivs 3.0 Spain
dc.rights	info:eu-repo/semantics/openAccess
dc.rights	http://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.subject	Àrees temàtiques de la UPC::Enginyeria dels materials
dc.subject	A. Polymer-matrix composites (PMCs)
dc.subject	B. Impact behaviour
dc.subject	E. Resin transfer moulding (RTM)
dc.subject	E. Thermoplastic resin
dc.subject	Fibres de carboni
dc.title	Impact behaviour of carbon fibre reinforced epoxy and non-isothermal cyclic butylene terephthalate composites manufactured by vacuum infusion
dc.type	info:eu-repo/semantics/publishedVersion
dc.type	info:eu-repo/semantics/article
dc.description.abstract	Carbon fibre reinforced cyclic butylene terephthalate (CF-pCBT) composites non-isothermally processed by vacuum infusion starting from a one-component system have been successfully manufactured. Both the micro-structure and low-energy impact properties of the CF-pCBT have been investigated and compared with an epoxy system (CF-epoxy). The CF-pCBT composite presents higher solidification shrinkage than the CF-epoxy one, and its void content doubles that of the CF-epoxy. The CF-epoxy composite’s critical delamination threshold energy is slightly higher than that of the CF-pCBT, whereas the CF-pCBT composite absorbs twice as much energy before being penetrated. The lower interlaminar shear strength of the CF-pCBT composite is suggested to be the origin of its higher energy absorbing capability and less brittle behaviour.
dc.description.abstract	Peer Reviewed

Mostrar el registro sencillo del ítem

Documentos relacionados

Otros documentos del mismo autor/a

Toughening of in situ polymerized cyclic butylene terephthalate by addition of tetrahydrofuran

Abt, Tobias Martin; Sánchez Soto, Miguel; Illescas Fernandez, Silvia; Aurrekoetxea, J.; Sarrionandia, Mariasun

Análisis del comportamiento a impacto-indentación de materiales poliméricos mediante el método de elementos finitos

Aretxabaleta, L.; Múgica, J.I.; Aurrekoetxea, J.; Mateos, M.; Castillo, G.; Urrutibeascoa, I.; Martínez Benasat, Antonio

Effect of superelastic shape memory alloy wires on the impact behaviour of carbon fiber reinforced in situ polymerized poly(butylene terephthalate) composites

Aurrekoetxea Narbarte, Jon; Zurbitu, J.; Ortiz de Mendibil, I.; Aguirregomezkorta, A.; Sánchez Soto, Miguel; Sarrionandia, Mariasun

Fractura postcedencia de polímeros

Maspoch Rulduà, Mª Lluïsa; Franco Urquiza, Edgar Adrian; Santana Pérez, Orlando Onofre; Gamez Pérez, José; Sánchez Soto, Miguel; Velasco Perero, José Ignacio; Martínez Benasat, Antonio

Influence of the injection moulding parameters on the cellular structure and thermo mechanical properties of ethylene-propylene block copolymer and PETG foams

Arencón Osuna, David; Sánchez Soto, Miguel; Martínez Benasat, Antonio; Gómez Gómez, Jaime Francisco; Rodríguez, Jesús; Salazar, Alicia

Accesibilidad | Aviso legal | Política de Cookies | Documentos de uso interno

Coordinación

Patrocinio