Para acceder a los documentos con el texto completo, por favor, siga el siguiente enlace:

Modelling Temperature Evolution in Equipment Engulfed in a Pool-fire
Planas Cuchi, Eulàlia; Casal Fàbrega, Joaquim
Universitat Politècnica de Catalunya. Departament d'Enginyeria Química; Universitat Politècnica de Catalunya. CERTEC - Centre d´Estudis del Risc Tecnològic
A method is presented to calculate the incident radiant heat ßux and the temperatures reached on any point of a tank surface when this tank is engulfed in a pool-Þre during the Þre transitory state (developing phase). ¹he method used to calculate the radiant heat ßux on the cylinder is based on a three-dimensional formulation and uses the deÞnition of a surface to establish the ßame contour (according to a rectangular pool) taking into account the temperature changes with height and time. ¹he results are compared to experimental data obtained with large scale pool-Þres of hexane and kerosene, and show a good agreement. Finally, some conclusions are derived.
Peer Reviewed
Àrees temàtiques de la UPC::Enginyeria química::Impacte ambiental
Indústria química -- Accidents
Incendis -- Prevenció
Attribution-NonCommercial-NoDerivs 3.0 Spain

Mostrar el registro completo del ítem

Documentos relacionados

Otros documentos del mismo autor/a

Hemmatian, Behrouz; Planas Cuchi, Eulàlia; Casal Fàbrega, Joaquim
Planas Cuchi, Eulàlia; Casal Fàbrega, Joaquim; Arnaldos Viger, Josep; Muñoz, Miguel Ángel
Hemmatian, Behrouz; Planas Cuchi, Eulàlia; Casal Fàbrega, Joaquim
Darbra Roman, Rosa Maria; Casal Fàbrega, Joaquim; Pastor Ferrer, Elsa; Vílchez Sánchez, Juan Antonio; Arnaldos Viger, Josep; Planas Cuchi, Eulàlia