Para acceder a los documentos con el texto completo, por favor, siga el siguiente enlace: http://hdl.handle.net/2117/14663

Synthesis of spatial RPRP closed linkages for a given screw system
Pérez Gracia, Alba
Universitat Politècnica de Catalunya. Institut de Robòtica i Informàtica Industrial; Universitat Politècnica de Catalunya. ROBiri - Grup de Robòtica de l'IRI
The dimensional synthesis of spatial chains for a prescribed set of positions can be applied to the design of parallel robots by joining the solutions of each serial chain at the end-effector. This design method does not provide with the knowledge about the trajectory between task positions and, in some cases, may yield a system with negative mobility. These problems can be avoided for some overconstrained but movable linkages if the finite-screw system associated with the motion of the linkage is known. The finite-screw system defining the motion of the robot is generated by a set of screws, which can be related to the set of finite task positions traditionally used in the synthesis theory. The interest of this paper lies in presenting a method to define the whole workspace of the linkage as the input task for the exact dimensional synthesis problem. This method is applied to the spatial RPRP closed linkage, for which one solution exists.
Àrees temàtiques de la UPC::Informàtica::Robòtica
Robots -- Dynamics
Robots -- Dinàmica
Classificació INSPEC::Automation::Robots::Robot kinematics
Attribution-NonCommercial-NoDerivs 3.0 Spain
http://creativecommons.org/licenses/by-nc-nd/3.0/es/
info:eu-repo/semantics/submittedVersion
Artículo
ASME PRESS
         

Mostrar el registro completo del ítem

Documentos relacionados

Otros documentos del mismo autor/a

Sands, Davin; Pérez Gracia, Alba; McCormack, Jay; Wolbrecht, Eric T.
Duraisamy, Karthikeyan; Isebor, Obiajulu; Pérez Gracia, Alba; Schoen, Marco P.; Naidu, Desineni Subbaram
Soh, Gim Song; Pérez Gracia, Alba; McCarthy, J. M.
Villa Uriol, Mari Cruz; Pérez Gracia, Alba; Kuester, Falco