Para acceder a los documentos con el texto completo, por favor, siga el siguiente enlace: http://hdl.handle.net/2099.1/12946
Título:
|
BladeDesigner beta testing process & getting started guide
|
Autor/a:
|
Antillach Paris, Jordi
|
Otros autores:
|
Lang, Sebastian |
Abstract:
|
This essay represent the culminating point of the work carried on by students of TUM
university that during the last 3 years have initiated a development process to create a
CAD tool to design compressors for aeronautical compressors to use in aircraft
engines.
The main objective of this project was to perform a Beta testing process on the
software in order to elaborate a release to public viability report. This process had to
take into account all functions integrated in the program as well as the interface
created to communicate with the user. Additionally it was deemed necessary to create
a getting started guide for new user to complement the documentation attached to the
program.
The testing method used was based on black box tests. Using already known 3D
models and recreating them with BladeDesigner to compare them and then establish
which functions of the program induced errors to the process or defects in the models
generated.
The creation of the guide has almost been a result of the learning process needed to
understand the program to test it. Through the acknowledgement of functionalities
and supported by the documentation provided by other team members I've
documented every step taken into the program as well as a thorough definition of the
interface elements summarizing them in a step by step guide.
Unfortunately the final conclusion points out that the program is not ready for public
release. The geometry building functions integrated in the interface are incomplete
and the secondary functions introduce errors to the building process and destabilize
the proper functionality of the program. Nevertheless this conclusion was expected as
this was the first time that BladeDesigner underwent a testing process and the
expected result was to find these bugs which will have to be corrected later. |
Materia(s):
|
-Àrees temàtiques de la UPC::Aeronàutica i espai::Aeronaus::Avions -Àrees temàtiques de la UPC::Aeronàutica i espai::Mecànica de vol -Aeronautics -Compressors -CAD -Aeronautical compressors -BladeDesigner -Aeronàutica -Compressors -- Aerodinàmica |
Derechos:
|
Attribution-NonCommercial-ShareAlike 3.0 Spain
http://creativecommons.org/licenses/by-nc-sa/3.0/es/ |
Tipo de documento:
|
Trabajo/Proyecto fin de carrera |
Editor:
|
Universitat Politècnica de Catalunya
|
Compartir:
|
|
Mostrar el registro completo del ítem