Para acceder a los documentos con el texto completo, por favor, siga el siguiente enlace: http://hdl.handle.net/10459.1/57790
| dc.contributor |
Palacín Roca, Jordi |
| dc.contributor |
Universitat de Lleida. Escola Politècnica Superior |
| dc.contributor.author |
Escribà Montagut, Gerard |
| dc.date |
2016-09-13T10:14:37Z |
| dc.date |
2016-09-13T10:14:37Z |
| dc.date |
2016-06 |
| dc.identifier |
http://hdl.handle.net/10459.1/57790 |
| dc.identifier.uri |
http://hdl.handle.net/10459.1/57790 |
| dc.description |
The objective of this project is to contribute in the printing and assembly of a life size robot at the Vaasa University of Applied Sciences. I had the opportunity to join this project, working together with Doctor Rayko Toshev and the other Erasmus student Alexandru Galben in this long going joint project to build the first open source 3D printed life size robot. The objective was to build this robot in less than 3 months while learning to print with 3D printers and follow all the guidelines writ-ten by the creator of this project Gael Langevin. |
| dc.language |
eng |
| dc.rights |
cc-by-nc-nd |
| dc.rights |
http://creativecommons.org/licenses/by-nc-nd/3.0/es/ |
| dc.rights |
info:eu-repo/semantics/openAccess |
| dc.subject |
Inmoov robot |
| dc.subject |
3D printing |
| dc.subject |
Life size robot |
| dc.subject |
Impressió tridimensional |
| dc.title |
Inmoov robot: building of the first open source 3D printed life-size robot |
| dc.type |
bachelorThesis |
Documentos con el texto completo de este documento
Mostrar el registro sencillo del ítem
