Para acceder a los documentos con el texto completo, por favor, siga el siguiente enlace:

Characterisation of the LMS200 laser beam under the influence of blockage surfaces. Influence on 3D scanning of tree orchards
Sanz Cortiella, Ricardo; Llorens Calveras, Jordi; Rosell Polo, Joan Ramon; Gregorio López, Eduard; Palacín Roca, Jordi
The geometric characterisation of tree orchards is a high-precision activity comprising the accurate measurement and knowledge of the geometry and structure of the trees. Different types of sensors can be used to perform this characterisation. In this work a terrestrial LIDAR sensor (SICK LMS200) whose emission source was a 905-nm pulsed laser diode was used. Given the known dimensions of the laser beam cross-section (with diameters ranging from 12 mm at the point of emission to 47.2 mm at a distance of 8 m), and the known dimensions of the elements that make up the crops under study (flowers, leaves, fruits, branches, trunks), it was anticipated that, for much of the time, the laser beam would only partially hit a foreground target/object, with the consequent problem of mixed pixels or edge effects. Understanding what happens in such situations was the principal objective of this work. With this in mind, a series of tests were set up to determine the geometry of the emitted beam and to determine the response of the sensor to different beam blockage scenarios. The main conclusions that were drawn from the results obtained were: (i) in a partial beam blockage scenario, the distance value given by the sensor depends more on the blocked radiant power than on the blocked surface area; (ii) there is an area that influences the measurements obtained that is dependent on the percentage of blockage and which ranges from 1.5 to 2.5 m with respect to the foreground target/object. If the laser beam impacts on a second target/object located within this range, this will affect the measurement given by the sensor. To interpret the information obtained from the point clouds provided by the LIDAR sensors, such as the volume occupied and the enclosing area, it is necessary to know the resolution and the process for obtaining this mesh of points and also to be aware of the problem associated with mixed pixels.
Mixed pixels
Terrestrial LIDAR
Laser measurement
3D plant structure
Radar òptic
Làsers -- Aplicacions científiques
Distàncies -- Mesurament
open access
cc-by, (c) Sanz-Cortiella et al., 2011
Molecular Diversity Preservation International (MDPI)

Documentos con el texto completo de este documento

Ficheros Tamaño Formato Vista
sensors-11-02751.pdf 5.198 MB application/pdf Vista/Abrir

Documentos con el texto completo de este documento

Ficheros Tamaño Formato Vista

Mostrar el registro completo del ítem

Documentos relacionados

Otros documentos del mismo autor/a