Título:
|
Muntatge i automatització d'un ascensor de 4 plantes
|
Autor/a:
|
Pérez Gracia, José Antonio; Vázquez Pena, Jordi
|
Otros autores:
|
Agència de Gestió d'Ajuts Universitaris i de Recerca; García Romera, Carlos |
Resum:
|
Treball de recerca realitzat per alumnes d'ensenyament secundari i guardonat amb un Premi CIRIT per fomentar l'esperit científic del Jovent l'any 2009. Les primera intenció d'aquesta recerca és unificar dues grans branques de la tecnologia com són la mecànica i l'elèctronica. Així va sorgir el projecte de construir un ascensor i provar un nou sistema de transmissió com és el vis sense fi juntament amb la introducció d'un microcontrolador del tipus PIC com a unitat central de processament. El primer pas d'aquest treball va ser el disseny d'aquest ascensor utilitzant diversos programes. Posteriorment es van encarregar aquestes peces abans dissenyades per tal de començar-ne la construcció. Aquestes peces van ser unides totalment mitjançant rebladures i altres suports mecànics. A continuació es va desenvolupar la programació del microcontrolador. El pas més important va ser l'acoblament del grup motor i el poliment dels aspectes més difícils de corregir com és el cas dels molts fregaments que patia al ser una estructura purament metàl·lica. Corregits aquests problemes i el nivell sonor, es va donar per conclòs el treball. |
Resum:
|
Research project carried out by pupils of secondary education and rewarded with a Prize CIRIT to foster the scientific spirit of the Youth in year 2009. The inicial objective was to find a research work who unificates the two big sides of the Tecnology, the mechanical and the electronical tecnology. The construction of one elevator was the opportunity to use and combine them using a new transmission system and using a new microcontroller of Picaxe type. First time, it was designed all the structural pieces of the elevator using few PC programs like Autocad or Google SketchUp. Secondly, it was bought the tailor-made pieces and it was mounted them using mechanichal supports. After that, it was programmed the microcontroller trying to make it looking like a real elevator. The last part of the work were the assembling part of the motor group in the top of the elevator because it made a lot of noise in consequence of all the structure was built in steel and aluminum. For finish it, it was tried to silence all the motor group building a case with a front door with the walls covered of Expanded ''Poliestireno'' and using a nylon pieces to avoid all the mechanic rubbings. |
Fecha de creación:
|
10-02-2010 |
Materias (CDU):
|
62 - Enginyeria. Tecnologia |
Materia(s):
|
Ascensors -- Instal·lacions Ascensors -- Disseny |
Derechos:
|
Aquest document està subjecte a una llicència d'ús de Creative Commons, amb la qual es permet copiar, distribuir i comunicar públicament l'obra sempre que se'n citin l'autor original i l’Agència i no se'n faci cap ús comercial ni obra derivada, tal com queda estipulat en la llicència d'ús (http://creativecommons.org/licenses/by-nc-nd/2.5/es/) |
Páginas:
|
51 p. |
Tipo de documento:
|
Trabajo/Proyecto fin de carrera |
Collection:
|
Els ajuts de l'AGAUR;2009PJ00146
|
Compartir:
|
|