© 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works

As wind power technology points to increase power ratings, the implementation based on a permanent-magnet synchronous generator (PMSG) with a full-power converter is expanding its market share. Multilevel converters, as for example, neutral-point clamped (NPC) converters, are therefore well suited for this application. Predictive current control presents similar dynamic response and reference tracking than other well-established control methods, but working at lower switching frequencies, and providing extensive flexibility to apply either online or offline different control laws to the same plant. In this work, the predictive current control is applied to both sides of the back-to-back NPC converter connecting a permanent-magnet synchronous wind power generator to the grid. DC-link neutral-point balance is achieved by means of the predictive control algorithm, which considers the redundant switching states of the back-to-back NPC converter. Reduced number of commutations, current spectrum control, and compliance with the low-voltage ride-through (LVRT) requirement are carried out with the predictive control. The obtained experimental results confirm the suitability of the proposed control approach.

Peer Reviewed