Title:
|
Performance-based procedure for the definition of controlled low-strength mixtures
|
Author:
|
Pujadas Álvarez, Pablo; Blanco Álvarez, Ana; Pialarissi Cavalaro, Sergio Henrique; Aguado de Cea, Antonio
|
Other authors:
|
Universitat Politècnica de Catalunya. Departament d'Enginyeria Civil i Ambiental; Universitat Politècnica de Catalunya. EC - Enginyeria de la Construcció |
Abstract:
|
Controlled low-strength material (CLSM) is a self-consolidating cementitious material used as backfill in narrow trenches. The high content of aggregates and water in CLSM leads to a special behavior that is closer to soil than concrete. Consequently, mixture proportioning methodologies for conventional concrete do not apply to CLSM. The objective of this paper is to propose a new methodology to achieve the optimal composition that fulfills the flowability and compressive strength requirements of the material. Instead of computing
the aggregate or the cement separately, all solid particles in the mixture are considered concurrently to estimate the water content in terms of water-to-solid ratio (W/S). In this way, the compressive strength can be modified without compromising the desired flowability. An example application is presented and an experimental program is conducted to validate this philosophy. The results confirm that the methodology proposed provides compositions that satisfy the main requirements of CLSM, thus representing a contribution to the use of more economical and adequate materials |
Abstract:
|
Controlled low-strength material (CLSM) is a self-consolidating cementitious material used as backfill in narrow trenches. The high content of aggregates and water in CLSM leads to a special behavior that is closer to soil than concrete. Consequently, mixture proportioning methodologies for conventional concrete do not apply to CLSM. The objective of this paper is to propose a new methodology to achieve the optimal composition that fulfills the flowability and compressive strength requirements of the material. Instead of computing
the aggregate or the cement separately, all solid particles in the mixture are considered concurrently to estimate the water content in terms of water-to-solid ratio (W/S). In this way, the compressive strength can be modified without compromising the desired flowability. An example application is presented and an experimental program is conducted to validate this philosophy. The results confirm that the methodology proposed provides compositions that satisfy the main requirements of CLSM, thus representing a contribution to the use of more economical and adequate materials. |
Abstract:
|
Peer Reviewed |
Subject(s):
|
-Àrees temàtiques de la UPC::Enginyeria civil::Materials i estructures::Materials i estructures de formigó -Cement--Additives -Controlled low-strength materials (CLSM) -Backfill -Optimal mix proportioning -Flowability -Water-solid ratio -Particle packing -Ciment -- Additius |
Rights:
|
|
Document type:
|
Article - Submitted version Article |
Share:
|
|