Title:
|
Numerical modelling of masonry shear walls failure mechanisms
|
Author:
|
Drougkas, Anastasios; Pelà, Luca; Roca Fabregat, Pedro
|
Other authors:
|
Universitat Politècnica de Catalunya. Departament d'Enginyeria de la Construcció; Universitat Politècnica de Catalunya. TE - Tecnologia d'Estructures |
Abstract:
|
This paper presents an investigation on the ability of two alternative FE-based
numerical methods to simulate the in-plane strength and collapse of brick masonry shear walls. The methods considered consist of a meso-model, in which the mortar-unit interface properties are modeled indirectly through the adoption of an appropriate model for the mortar joints, and a simplified
micro-model with sliding interface elements to represent the joints. The performance of both methods is analyzed by the simulation of an experimental campaign on 1:4 scale masonry shear walls with different pre-compression applied levels. The numerical testing is adopted as a procedure to evaluate
failure envelopes in a wide range of possible structural in-plane responses. The FE analyses tools proposed are intended to reproduce the failure mechanisms that may occur for different combinations of vertical and horizontal forces, such as sliding, diagonal cracking and crushing. The comparison has allowed the appraisal of the capacity of the numerical models considered to simulate the strength of shear walls for these different failure conditions |
Abstract:
|
Peer Reviewed |
Subject(s):
|
-Àrees temàtiques de la UPC::Edificació::Elements constructius d'edificis::Elements estructurals d'edificis -Walls -FE analysis -Walls -Shear -Crushing -Damage -Cracking -Micro-Modeling -Murs |
Rights:
|
Attribution-NonCommercial-NoDerivs 3.0 Spain
http://creativecommons.org/licenses/by-nc-nd/3.0/es/ |
Document type:
|
Article - Published version Conference Object |
Share:
|
|