Solar thermal energy installation for student tutorial: Implementation of hot water load, acquisition and measurements, software interface for supervision.

Consultar RECERCAT

Para acceder a los documentos con el texto completo, por favor, siga el siguiente enlace: http://hdl.handle.net/2099.1/16833

Título:	Solar thermal energy installation for student tutorial: Implementation of hot water load, acquisition and measurements, software interface for supervision.
Autor/a:	Rovira Cladera, Magín
Otros autores:	Paire, Damien
Abstract:	Practical education is a powerful tool that can be used to complete the education of future engineers. The aim of this thesis is to adapt a standard solar water heater in order to make it able to be used for academic uses. As its use won’t be the usual one, and it’s wanted to observe the operation of the system, it will be necessary to monitor the significant variables and to design a load for the system. The load must cool the system in one way or another to close the cycle. Those values that become impossible or difficult to measure could be simulated.
Abstract:	Outgoing
Materia(s):	-Àrees temàtiques de la UPC::Energies::Energia solar tèrmica -Àrees temàtiques de la UPC::Ensenyament i aprenentatge::Ensenyament universitari -Solar thermal energy -- Education, Higher -Solar water heaters -- Computer simulation -Energia tèrmica solar -- Ensenyament universitari -Escalfadors d'aigua solars -- Simulació per ordinador
Derechos:	Attribution-NonCommercial-NoDerivs 3.0 Spain http://creativecommons.org/licenses/by-nc-nd/3.0/es/
Tipo de documento:	Trabajo/Proyecto fin de carrera
Editor:	Universitat Politècnica de Catalunya; Université de technologie Belfort-Montbéliard
Compartir:

Coordinación

Patrocinio